Error Code P0A82: What It Means & What To Do?

<<See All OBD Codes

The trouble code P0A82 can be described as Hybrid Battery Pack Cooling Fan 1 Performance/Stuck Off. The cooling air would flow from the top to the bottom between the HV battery modules. Now once the modules have been cooled by it, it is then discharged from the bottom right surface of the HV battery assembly.

Don’t worry if P0A82 error code is triggering again and again. We offer wide range of auto parts at affordable prices to our dear customers. The nickel metal-hydride batteries are used by the HV battery and there is no need of charging externally. The power management control ECU controls the SOC of the HV battery at a constant level while driving. There are 28 modules in the HV battery and every module would consist of eight 1.2 V cells in series. The battery block voltage at 14 locations is monitored by the battery smart unit. There are 2 modules in a set of every battery block.

What causes this problem with Hybrid Battery Pack Cooling Fan 1 Performance/Stuck Off?

• Faulty quarter vent duct
• Malfunctioning quarter vent duct no. 2
• There can be inoperative quarter vent duct Inner no. 2
• Some issues related to the ventilator inner duct
• Unusable battery
• Imperfect blower assembly
• There can be distorted battery ECU

1. Powertrain Control Module - Do you remember when was the last time you got your car Powertrain Control Module checked up? A dirty Powertrain Control Module can cause a lot of issues like displaying P0A82 code.
2. Battery Blower Assembly - Poor Battery Blower Assembly can cause a lot of difficulties, so why not get it replaced at time?
3. Engine Control Module - OBD Code P0A82 can appear because of faulty boost pressure/ turbocharger position sensor.
4. Car Battery - Everything is fine with Engine Control Module and still P0A82 code triggering? Then you must get your Car Battery checked.
5. Hv Battery Assembly - There can be some issues with the Hv Battery Assembly due to which you may see P0A82 code appearing over and over again. Visit us to buy best quality Hv Battery Assembly online.
6. Electronic Control Unit - A lot of issues can arise do to defective Electronic Control Unit. Did you just see P0A82 code flashing? Now you know the reason why it is appearing. Get it inspected and replaced on time.
7. Body Control Module Component - Faulty Body Control Module Component can be the reason why P0A82 code is flashing. Visit us to purchase top notch Body Control Module Component online.
8. Hybrid Battery - It is an important auto part which needs full care. A faulty Hybrid Battery can be a reason behind the flashing up of P0A82 code.

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0A82 code by mentioning some major symptoms below:

Common Symptoms

• Check engine light might come into signal

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0A82:

There are currently two main types of cylinder deactivation used today, depending on the type of engine. P0A82 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

• It is essential to restore the flawed battery
• Repair or replace the quirky ventilator inner duct
• Rehabilitate the defaults in the quarter vent duct Inner no. 2
• The malfunctioning blower assembly should be repaired or replaced as per the need
• Carefully adjust the faults in the quarter vent duct no. 2
• The battery ECU should be restored to working order
• Recondition the non-functioning quarter vent duct

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of battery blower, battery cooling fan, battery connectors and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• This is a general type of error code which is diagnosed with the help of a scanner.
• The mechanic will insert a scanner to diagnostic port of the vehicle and recover the codes and freeze frame data.
• If he happens to find any additional error codes, he has to address them as well.
• Once it is done, he has to reset the vehicle, and then test drive to see if the error codes appear.
• If the error code does not return, then there can be an erratic condition.
• Then the mechanic has to check the wires, connectors and other electrical components and quickly replace them if he finds them to be damaged or defective.

P0A83 - Hybrid Battery Pack Cooling Fan 1 Stuck On