Guide To P0A68 OBD Error Code Solutions

<<See All OBD Codes

Do you have issues with your high voltage system? If YES, chances are that you might end up with OBD error code P0A68 flashing on your vehicle. Wondering what this error code means? Worried? Don’t worry! You can have in depth understanding of this error code P0A68 with the help of our subsequent sections.

If OBD error code P0A68 is a completely alien word and you are worried about what to do, then you no longer need to stress out. We are here to help you out with all your queries related to this code. Your vehicle’s HVCM, also known as high voltage control module will set the error code when it detects high current with Drive motor “B” phase U current. Also if the High Voltage control module detects a failure of the current monitoring sensors, it will set code P0A68. To know more about few of it’s common causes take a look at the section below.

What causes this problem with the Drive Motor "B" Phase U Current High?

• Faulty or malfunctioning inverter with converter assembly will lead to this issue
• An open or shorted inverter with converter assembly harness
• Poor electrical connection in the inverter with converter assembly circuit

1. HV Battery - Need to undergo high voltage battery replacement? If Yes, then you have arrived at the right place. We have in stock for you high end HV Batteries from top brands.
2. HV Control Module - We have in stock high end HV Control Modules for every make and model on the Canadian road. All you need to do to get them is to browse through our website and order your needed parts.
3. Electronic Control Unit - If you wish to replace your car’s ecu to fix this OBD error code P0A68, then you are at the right place, with us you can get your hands on the best selection of electronic control units for your vehicle.
4. Inverter With Converter Assembly - Chances are that if you are facing OBD error code P0A68 your inverter with converter assembly is damaged and demanding for a quick change. So what are you waiting for? Buy new ones with us now.
5. Inverter - If you need car charger inverter or car battery inverter, then you can easily find one with us for all makes and models on the Canadian roads.
6. Inverter Current Sensor - P0A68 error code might have to do with inverter current sensor being faulty. The PartsAvatar website offers a comprehensive range of inverter current sensors for you to select from that is the right fit for your car.

Interested in knowing the symptoms to obd code P0A68? If yes, then you have arrived at the right place. We at PartsAvatar have listed out few common symptoms associated with this Drive Motor "B" Phase U Current High.

Common Symptoms

• High voltage system posing operational challenges
• Illumination of check engine light

To correct this issue you might need to undergo few replacements for the defective parts such as:

• First of all, you will need to inspect all the high voltage system parts for any damage
• If you come across any loose connections in the inverter with converter assembly circuit, you will need to fix it.
• Next, you will need to inspect for any short or open wires in the related circuits
• Lastly, make sure to fix or replace the faulty inverter with converter assembly

Apart from the fuel injector, you might need to undergo few more replacements. You might need HV Battery, Electronic Control Unit, Power Transistors, Hydraulic Pressure and many other parts. Where to get them from? Well, if you want quality parts, then we can prove to be your dream destination.

It is essential to diagnose this fault code P0A68. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0A68 code to be stored:

To begin with you will need to use a scanner to check for the stored error code.Next, you will have to connect a scanner to the diagnostic port of the vehicle and recover the codes and freeze frame data. This will help you in further diagnosis. Now you will need to conduct a road test and check what all codes return,. If you come across any other codes related to high voltage system we would recommend you to get rid of them first before attempting to solve the error code P0A68. To undergo a complete diagnosis of this error code, you will need few tools such as diagnostic scanner, a digital volt/ohmmeter, and a reliable vehicle information source. While diagnosing make sure that you carefully check the drive motor phase B, U current.

Common Mistakes When Diagnosing The P0A68 Code

There are chances that you undergo a inverter with converter assembly replacement, but it might not be needed. This way you will end up spending unnecessary bucks on your car. The code could be solved with a simple computer learn procedure or reprogramming. Therefore a proper diagnosis is always recommended.