Guide To P0A64 OBD Error Code Solutions

<<See All OBD Codes

OBD error code P0A64 flashing? Tensed on how bad it can affect your vehicle’s health? Well, you might not like to hear it but it can be extremely fatal for your vehicle’s overall health, if not addressed soon. If you face this error code then you must get it diagnosed and do not relax until it is fixed. To know more about this problem, read through our following sections.

Wondering what is this error code P0A64? Are you thinking how serious can this problem is and can you really do with a faulty inverter with converter assembly? Well to know that, let's take a look at the functions it performs. It is responsible for converting the high voltage direct current from the high voltage battery and also the alternator current for MG1/MG2. For those who don’t know, a car inverter battery has 3-phase bridge circuit that converts the direct current and the three-phase alternating current. Now, coming to error code P0A64, your vehicle’s high voltage control module will set the error code P0A64 when it detects a failure of the current monitoring sensors. It might detect drive motor “A” phase w current being low. To know more about this error code and its related issues take a look at the sections below.

What causes this problem with the Drive Motor "A" Phase W Current Low?

• Bad inverter with converter assembly will lead to this issue
• Open or shorted inverter with converter assembly harness
• Defective electrical connection in the inverter with converter assembly circuit

1. HV Battery - Are you facing OBD Error Code P0A64? Well, you can get that fixed with a new HV battery. Also you can find quality HV battery for every make and model with us at PartsAvatar.
2. HV Control Module - Wondering what went wrong? High voltage parts are all fine but you still find the trouble code P0A64 flashing? In such a situation your HV Control Module not be working according to your vehicle’s specifications. Why don’t you think of checking our website for our wide range of HVCM?
3. Electronic Control Unit - As is clear from the sections above P0A64 error code is all about using the right ECU, so why not get your car’s engine control unit diagnosed and replace them if they are damaged.
4. Inverter With Converter Assembly - Now you must be clear that a damaged inverter with converter assembly can become a potential cause for many issues. So why not check and replace the damaged ones?
5. Inverter - We have in stock high end vehicle power inverters for all makes and models. So, don’t waste time and get your hand on our best range of auto parts today.
6. Inverter Current Sensor - If you need to undergo inverter current sensor replacement and are worried about the cost? Then we have a good news for you. You no longer need to worry about that as we have for you best priced inverter current sensor in stock for you.

We at Parts Avatar Canada care for our customers, and that’s why we will help you to diagnose P0A64 code by listing out some major symptoms. They are mentioned below as follows:

Common Symptoms

• High voltage system might refuse to work properly
• Flickering of check engine light

After you know the symptoms of your vehicle’s problem, it becomes easy to detect it and get started with solving it. So, next on our list is few common steps to correct this issue with your vehicle’s.

• Inspect all the high voltage system parts for any damage
• Fix any loose connections in the inverter with converter assembly circuit
• After that inspect for any short or open wires in the related circuits
• Now, make sure to fix or replace the faulty inverter with converter assembly

To do all this, you will need few high-quality auto parts such as HV Battery, Inverter, Motor Inverter Current Sensor, Inverter With Converter Assembly, Inverter With Converter Assembly Harness, Electronic Control Unit and so on. From where will you get them? From your local store? Well, why go there when you can order quality parts with us while sitting in the comfort of your home. So, just browse through our website and order your needed parts today.

Its highly essential to diagnose the problem first before starting to fix it. In the same manner let's have a look on how to diagnose the obd error code P0A64. 

To begin with you will need to use a scanner to check for the stored error code. Next, you will have to connect a scanner to the diagnostic port of the vehicle and recover the codes and freeze frame data. This will help you in further diagnosis. Now you will need to conduct a road test and check what all codes return,. If you come across any other codes related to high voltage system we would recommend you to get rid of them first before attempting to solve the error code P0A64.

To undergo a complete diagnosis of this error code, you will need few tools such as diagnostic scanner, a digital volt/ohmmeter, and a reliable vehicle information source. While diagnosing make sure that you carefully check the generator phase W.

Common Mistakes When Diagnosing The P0A64 Code

There are chances that you undergo a inverter with converter assembly replacement, but it might not be needed. This way you will end up spending unnecessary bucks on your car. The code could be solved with a simple computer learn procedure or reprogramming. Therefore a proper diagnosis is always recommended.