Error Code P0A62: What It Means & What To Do?

<<See All OBD Codes

Just like P0A60 and P0A61, OBD Error Code P0A62 is a generic trouble code and mostly applies to all the OBD-II vehicles. In Spite of being generic the ways to diagnose and correct may vary from vehicle to vehicle and manufacturer to manufacturer. To have a deeper knowledge of OBD error code P0A62, you will have to go through our subsequent sections.

If you are wondering what this error code P0A62 means, then you no longer need to worry over it. We at PartsAvatar are here to help you out with all your P0A62 error code related queries. Your vehicle’s high voltage control modules (HVCM) makes use of various sensor to inspect the current flowing through the high voltage cables. The OBD Error code P0A62 will be set by HVCM when it senses some faults or failure of the current monitoring sensors. In other words it will set this error code P0A62 when it detects drive motor “A’ phase V current being high.

What causes this problem with the Drive Motor "A" Phase V Current High?

• Loose or poor electrical connections in the circuit for inverter with converter assembly
• Defective inverter with converter assembly
• Shorted or open inverter with converter assembly harness

1. HV Battery - As Already Clear From The Section Above That Faulty HV Inverter Or Batteries Can Be A Possible Cause Behind This Issues. So, Replacing Them Will Definitely Be A Good Idea.
2. HV Control Module - If Your Vehicle’s High Voltage Control Module Is Defective It Can Cause This Issue, So You Might Also Need To Replace The Car’s HVCM To Correct This Engine Error Code P0A62.
3. Electronic Control Unit - If You Are Looking For Electronic Control Unit To Correct This Issue? Then We Can Be Your Dream Destination. We Have Stocked Best Priced ECU’s For Every Make And Model On The Canadian Roads.
4. Inverter With Converter Assembly - If You Need Inverter With Converter Assembly To Correct This Concern Then All You Need To Do Is To Select Your Make/Model Specific Part And Get This Error P0A62 Fixed At The Earliest. We Have In Stock Best Range Of Auto Parts For You.
5. Inverter - We Are Sure That For Fixing This Problem You Will Need To Replace The Defective Inverter Battery. With Us You Can Also Find A Wide Variety Of Inverters From Top Auto Brands To Fix This OBD Error Code P0A62.
6. Inverter Current Sensor - Search Through Our Range Of Extensive Inverter Current Sensor To Find The Right One For Your Car.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0A62 here:

Common Symptoms

• Illumination of service soon warning light
• Non working of the high voltage system of your vehicle

We have listed out some ways which would help you to correct the occurrence of OBD Code P0A62. They are mentioned here as follows:

• Repair or replace all damaged high voltage system parts
• Fix all the loose connections in the inverter with converter assembly circuit
• Repair all the short or open wires in the related circuits
• Repair or replace the faulty inverter with converter assembly

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of HV Battery, Inverter, Motor Inverter Current Sensor, Inverter With Converter Assembly, Inverter With Converter Assembly Harness, Electronic Control Unit and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code P0A62. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0A62 code to be stored:

In order to diagnose this error code P0A62 properly you will need to use a scanner to check for the stored error code. Next, you will have to connect a scanner to the diagnostic port of the vehicle and recover the codes and freeze frame data. This will help you in further diagnosis. Now you will need to conduct a road test and check what all codes return,. If you come across any other codes related to high voltage system we would recommend you to get rid of them first before attempting to solve the error code P0A62. To undergo a complete diagnosis of this error code, you will need few tools such as diagnostic scanner, a digital volt/ohmmeter, and a reliable vehicle information source. While diagnosing make sure that you carefully check the drive motor phase A.

Common Mistakes When Diagnosing The P0A62 Code

There are chances that you undergo a inverter with converter assembly replacement, but it might not be needed. This way you will end up spending unnecessary bucks on your car. The code could be solved with a simple computer learn procedure or reprogramming. Therefore a proper diagnosis is always recommended.