Guide To P0A58 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0A58 can be explained as Drive Motor "B" Current Sensor Circuit High. If the ECM would detect a variation in the voltage coming from the drive motor "B" current sensor circuit that is outside the parameters set by the automobile manufacturer, then it would store the P0A58 error code. This would also give rise to the illumination of the check engine light.

We believe that an investment in knowledge pays the best interest. So why not learn more about the P0A58 error code? This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model.

What causes this problem with the Drive Motor "B" Current Sensor Circuit High?

• There can be distorted drive motor B current sensor
• Drive motor B current sensor harness is open or small
• Drive motor B current sensor circuit might have inadequate electrical connection

1. Powertrain Control Module - A faulty Powertrain Control Module can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Drive Motor Current Sensor - If everything is alright with PCM, then there is surely some defect in Drive Motor Current Sensor. Get it replaced before the situation gets worse.
3. Drive Motor Current Sensor Harness - P0A58 code can display due to some issues in the Drive Motor Current Sensor Harness. So, it is very important to replace the Drive Motor Current Sensor Harness with us at equitable prices.
4. Dash Check Engine Light - Do you remember when was the last time you got your car Dash Check Engine Light checked up? A dirty Dash Check Engine Light can cause a lot of issues like displaying P0A58 code.
5. Engine Control Module - There can be some issues with the Engine Control Module due to which you may see P0A58 code appearing over and over again. Visit us to buy best quality Engine Control Module online.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0A58 here:

Common Symptoms

• Visibility in the check engine light
• High voltage system not operating correctly

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• Make sure to mend the faulty engine control module
• Repair or replace the quirky drive motor B current sensor
• Carefully adjust the faults in the drive motor B current sensor circuit
• Recondition the non-functioning drive motor B current sensor harness

Parts Avatar Canada endeavours to fulfil all the needs of its consumer, that’s why we have a huge collection of top-quality drive motor current sensor, drive motor current sensor harness, motor current sensor, ecm car, ecm module and many more at equitable prices. We won’t let you down in any way.

Here are some steps which you should follow in order to diagnose this fault code:

• A careful inspection of the vehicle is carried out by the mechanic with the help of a scanner.
• After this inspection, he will recover every stored code in the vehicle as well as freeze frame data by inserting a scanner to the diagnostic port of the vehicle.
• He will store this information as it may help him with further diagnosis.
• After the codes are recovered, the vehicle is reset, test- driven to check for the occurrence of the error code.
• He will clearly know that an erratic condition has prevailed if the code does not return quickly.
• But if the code returns instantly, he will then start inspecting the transmission fluid for any leaks.
• In some cases, the transmission fluid can be dirty or it can be contaminated.
• The area of leak will be found and fixed. The dirty or contaminated fluid should be replaced with clear fluid.
• Sometimes the fluid may be not be filled at the correct level, which the mechanic will find during diagnosis. Sometimes, the solenoid itself can be defective which has to be checked for any damages.
• After this, the technician will visually inspect every wires, connectors, harness and fuses for any possible damages or defective and repairs them as needed.
• You must always know that once the error code is repaired, it is always the best idea to test drive and check the vehicle if the error code appears again which can help the technician to know the area of fault and as to how the error code occurred in the vehicle.
• This can easily help the mechanic to fix the error code.

Common Mistakes When Diagnosing The P0A58 Code

Common mistakes while diagnosing this trouble code are unnecessary and expensive replacements which usually happen when one doesn’t follow all the steps carefully. In this code usually people replace drive motor B current sensor without even properly diagnosing it.

The most common mistake while diagnosing this code is missing out on diagnosing steps which further leads to the expensive and unnecessary replacements. It is always recommended to seek help of experienced diagnostician to avoid any mistakes.