P0A36 OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0A36 can be defined as Generator Temperature Sensor Circuit. The error code P0A36 would start triggering when the PCM would detect some fault in generator temperature sensor. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things.

The motor temperature sensor detects the temperature of the transaxle fluid. As the temperature of the fluid changes, the resistance of the thermistor installed in the motor temperature sensor No. 2 varies. When a failure is detected in the Hybrid Motor Temperature Sensor circuit, the engine control module (PCM) will set code P0A36.

What causes this problem with the Generator Temperature Sensor Circuit?

• Malfunctioning generator temperature sensor
• Generator temperature sensor harness might be unlocked
• Generator temperature sensor circuit might have bad electrical connection

1. Generator Temperature Sensor - The P0A36 code can also arise due to some issues in Generator Temperature Sensor. So, it is advised to replace them as soon as possible.
2. Engine Control Module - Do you remember when was the last time you got your car engine control module checked up? A damaged engine control module can cause a lot of issues like displaying P0A36 code.
3. Powertrain Control Module - Powertrain Control Module is an important car part which should never be neglected. May be there is some fault in it due to which P0A36 code may start flashing.
4. Generator Assembly - Is your Generator Assembly damaged or broken? Don’t worry as we have solutions for all your problems.
5. Automatic Transmission Module - Defective car Automatic Transmission Module can be a major reason why P0A36 code depicts. So, make sure to replace it online so that you don’t have to face any further issues.
6. Diagnostic Tool - Detect the OBD error code by using professional diagnostic tools. Buy them from us now!

Willing to know some common symptoms of OBD Trouble Code P0A36? Your wish is our demand. Have a look at them below:

Common Symptoms

• Check engine light might come into signal
• Operation of the high voltage system might not be possible
• Automobile might not work properly

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0A36:

• You must fix the defective generator assembly
• Make sure to mend the faulty generator temperature sensor harness
• It is essential to restore the flawed generator temperature sensor circuit
• Repair or replace the quirky PCM
• Carefully adjust the faults in the automatic transmission module

There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade ECM, Generator Temperature Sensor and a lot more for our precious customers.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

• The mechanic will use an OBD scanner, to inspect the error codes in the vehicle.
• By connecting a scanner to the diagnostic port of the vehicle, the mechanic or the technician can easily recover every of the stored codes and freeze frame data.
• Record this information, as it can be helpful for further diagnosis.
• At times, the shift solenoid itself can cause issue if it is damaged or broken.
• Once you carefully inspect every component, you have to reset the code. Once it is reset, test drive your vehicle to see if the codes reappear.
• If the error does not return quickly, then there can be an intermittent connection in the vehicle.
• It is important to check for the generator temperature sensor problems that might be giving wrong data thus, leading to inappropriate functioning. Thus, replace the faulty sensor immediately.
• Also check for transmission related issues and replace the faulty component. Also check for intake manifold issue that might be due to leakages thus causing lean engine conditions.
• If everything seems correct, then check the ECU and PCM for the faults and replace and reprogram as required.

Common Mistakes When Diagnosing the P0A36 Code

The most common mistake while diagnosing this code is missing out on diagnosing steps which further leads to the expensive and unnecessary replacements. It is always recommended to seek help of experienced diagnostician to avoid any mistakes.

• Malfunctioning hybrid transaxle assembly
• Wiring related issues
• There can be a failure in the powertrain control module