P0A1E OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0A1E can be explicated as Starter/Generator Control Module. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. The starter/generator control module is monitored by the engine control module. This trouble code would be set in by the engine control module when the starter/generator control module would not be as per the parameters set by the manufacturer.

The brighter you are, the more you have to learn! That’s why we are here to provide you more knowledge about the P0A1E trouble code. A self-inspection is done by the battery control module so that it can be sure that it is competent of working genuinely. Now if the battery control module would fail in the self-inspection, then the ECM would trigger up the P0A1E error code.

What causes this problem with the Starter/Generator Control Module?

• Starter/generator control module circuit inferior electrical connection
• There can be inoperative starter/generator control module
• There can be opened or shorted starter/generator control module harness

1. Starter Kit - OBD Code P0A1E can appear because of faulty Starter Kit. Buy high grade Starter Kit online from Parts Avatar Canada.
2. Engine Control Module - There can be some issues with the Engine Control Module due to which you may see P0A1E code appearing over and over again. Visit us to buy best quality Engine Control Module online.
3. Auto Transmission Control Module - Are you facing some faults in your Automatic Transmission Control Module? Don’t worry and get them replaced or else P0A1E code can turn up.
4. Car Battery - Common cause behind this P0A1E error code can be some fault in Car Battery. So, it will be a good decision to replace them now.
5. Powertrain Control Module - Automatic Transmission Module is perfectly fine but still but having that trouble code P0A1E flashing? In such a situation your Powertrain Control Module might be faulty. Why don’t you think of getting that replaced?
6. Auto Transmission Shift Solenoid - The P0A1E code can also arise due to some issues in Auto Transmission Shift Solenoid. So, it is advised to replace them as soon as possible.
7. Body Control Module Component - P0A1E code does not really end up spoiling your Auto Transmission Shift Solenoid, but it might also accompany few Body Control Module Component issues. We have best Body Control Module Component with us.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0A1E here:

Common Symptoms

• Appearance of the service engine soon light

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0A1E:

• You must fix the defective starter/generator control module circuit
• Make sure to mend the faulty starter/generator control module
• It is essential to restore the flawed PCM
• Repair or replace the quirky starter/generator control module harness

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced Generator, Battery Control Module and a lot more to help you out in fixing your car.

If you want to easily diagnose this trouble code, then you must follow the steps which are mentioned here as below:

• This is a general type of error code which is diagnosed with the help of a scanner.
• The mechanic will insert a scanner to diagnostic port of the vehicle and recover the codes and freeze frame data.
• If he happens to find any additional error codes, he has to address them as well.
• Once it is done, he has to reset the vehicle, and then test drive to see if the error codes appear.
• If the error code does not return, then there can be an erratic condition.
• Then the mechanic has to check the wires, connectors and other electrical components and quickly replace them if he finds them to be damaged or defective.

Common Mistakes When Diagnosing The P0A1E Code

• There can be some faults in the starter/generator control module
• There might be a need to update the starter/generator control module software