P0A16 OBD Error Code: Problem & Solutions

<<See All OBD Codes

Constantly see the error code P0A16 flashing on? Check engine light illuminated? Don’t know what to do? Where to start from? Well Parts Avatar has a solution. Here we have written down all the information we have about the OBD error code P0A16 that is definitely going to get you through the diagnosis. It should be noted that this OBD-II code powertrain control module (PCM) failure is often determined as an engine mount "A" control circuit high. Also, the engine mounts serve the purpose of keeping safe the engine to the body of the vehicle (basically, it is just a rubber dampener). In the latest model vehicles, these electronically monitored engine mounts help in decreasing the amount of vibration from the engine sensed by the driver as well as the passengers.

Generally, it can be observed that the mounts have a fluid that is present inside them that tends to change in density according to the electrical signal received by the engine's control module (PCM). the code P0A16 is stored as soon as the PCM detects an invalid signal back from the front engine mount.

What causes this problem with Engine Mount "A" Control Circuit High?

• A jammed or broken engine mount ‘A’
• The harness in the engine mount ‘A’ loose or short circuited
• A bad electrical connection in the engine mount ‘A’ circuit

1. Powertrain Control Module - Stressed? Don’t know what to do? Abbreviated PCM; this is an integral control unit. So, a defective one should be changed immediately.
2. Engine Control Module - Facing the error code P0A16? An inferior quality engine control module can always be hazardous for the system also it is one of the primal causes behind the occurring of the error code P0A16. Tune into Parts Avatar for supreme quality engine control module at the prices you have always been looking for.
3. Shift Solenoid - A jammed or broken shift solenoid can end up being the chief host inviting the error code P0A16. So, replacing one can be one of the wisest decisions to avoid a problematic system.
4. Car Clutch - Worn out or an unsound clutch can often be troublesome. So, to add some spark to your ride you definitely need the perfect quality clutches offered at Parts Avatar. Isn’t that just the perfect deal?
5. Dash Check Engine Light - Dim or fainted engine light can be hazardous and trigger the error code P0A16 all the time. So, we recommend you repair or replace your defective engine light now. Tune into Parts Avatar for premium quality products and services.

Don’t know the reason behind all these problems? Well, it could be due to an error code stored. So, in order to know the right error code stored it is essential to know the symptoms that can be observed as soon as the code is stored:

Common Symptoms

• The trouble code P0A16 stored is followed by an illuminated check engine light on the vehicle’s gauge cluster.
• At times, one can also observe both transmission warning light along with overdrive light flashing on too.
• In addition to these, the driver can also face drivability problems connected to transmission like harsh shifting, transmission slippage, transmission heating excessively, and possibly even a problem in shifting too.
• The transmission may at times also display a “limp-in” mode with the torque converter clutch showing a disability to engage or disengage. Most of the times, the drivers may note a fall in fuel efficiency too.
• An unusual vibration while driving will be registered by the driver.
• Often, the transmission banging into gear at the time of shifting from park to reverse or drive

Treating an error code at times can be stressful as well as confusing. At first it may seem quite confusing but with Parts Avatar, we promise to end all your confusions. Here we have listed a few easy measures that should be adopted if you want to correct the error code:

• Repair or replace a jammed or unsound engine mount ‘A’
• All the electrical parts should be inspected. Any shorted or open harness should be changed as per the requirements
• Fix a bad electrical connection running in the engine mount ‘A’ circuit

If you need parts to fix this issue, you no longer need to search for them. We at PartsAvatar Canada have an extensive range of auto parts pcm, engine mount, ecm, automatic transmission parts, shift solenoid, clutch, engine light, hydraulic clutch, luk clutch, solenoid car parts, powertrain control module, clutch parts in stock from you, ranging from all replacement parts to all interior and exterior parts

Here are some steps which you should follow in order to diagnose this fault code P0A4D:

To begin the diagnosis, the first step of the mechanic should be using a scanner (or code reader) and a digital volt/ohmmeter as these will be helpful in successfully diagnosing this code-storing condition. Next, it is essential to you diagnose with a visual inspection of system wiring, connectors, and components. It is recommended to restore or mend any open, shorted, damaged, or corroded items as required and retest the system to make sure that repairs were successful. If the system wiring, connectors, and components appear to be in normal working order, connect the scanner to the diagnostic connector and record all stored trouble codes and freeze frame data. Also, repair or replace system circuits/connectors as required and retest the system to ensure that repairs were successful.

Common Mistakes When Diagnosing the P0A4D Code

Fearing a misdiagnose? Well, it could happen again if you don’t avoid these common mistakes:

• Before performing the repairs, the mechanic should go through the system thoroughly, as at times he may end up performing major repairs that are expensive and time taking while the code could have been solved by just repairing some minor faults.
• A defective set of engine mount parts.