Guide To P0A13 OBD Error Code Solutions

<<See All OBD Codes

Alarmed? “Check engine light”? Don’t know what to do? Well, not anymore. With Parts Avatar Canada, your only destination for expedite shopping and superior quality parts, we assure you not only the best at rock bottom prices to keep you on a payroll but also to equip you with A straightforward guide to crack the OBD’S. Here’s all you need to know about the OBD code P0A13. At first it may seem quite confusing but with Parts Avatar, we promise to end all your confusions. In order to get aptly charged the auxiliary battery requires 12V voltage. So, the hybrid vehicle inverter performs the task of converting the high voltage from the hybrid system to 12V so the battery can get charged. This further enables the high voltage system to supply power to numerous other areas such as the vehicle lighting and the radio.

Generally, it should be noted that the error code P0A13 sets in at the time when the engine control module (ECM) detects a low voltage in the auxiliary battery. Also, a vehicle unable to function can be observed after a DC/DC converter registers an operational failure.

What causes this problem with DC/DC Converter Enable Circuit/High?

• A distorted DC/DC converter
• A DC/DC converter harness that is loose or shorted
• A powerless connection in the electrical connection
• A defective powertrain control module (PCM)

1. DC Converter - Facing the error code P0A12? An inferior quality or an unsound DC converter can always be hazardous for the system also it is one of the primal causes behind the occurring of the error code P0A12. Tune into Parts Avatar for supreme quality DC converters at economical prices.
2. Engine Wiring Harness - A distorted and disconnected engine wiring harness can end up being the chief host inviting the error code P0A12. So, replacing one can be one of the wisest decisions to avoid a problematic system.
3. Powertrain Control Module - Weary and damaged powertrain control module can often be problematic. So, to add some spark to your ride you definitely need the perfect quality powertrain control modules offered at Parts Avatar. Isn’t that just the perfect deal?
4. Inverter - Having problems with the inverter? Don’t you worry, Parts Avatar has it all. A faulty or an unsound inverter could end up being the root cause stimulating the error code P0A12.

In order to accurately diagnose an error code, the first step is to know its symptoms. So, for your convenience Parts Avatar has listed here a few general symptoms that can be observed as soon as the code is stored:

Common Symptoms

• An engine light flashing (or service engine soon warning light)

Here you can have a look at a number of ways with which you can mend to restore the P0A13 code:

• Replace or repair a distorted DC/DC converter immediately
• Any open or short-circuited harness in the DC/DC converter should be checked. Amendments should then be performed accordingly
• An inadequate electrical connection running in the DC/DC converter circuit should be changed or restored
• Fix the faulty powertrain control module as soon as possible

There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade DC converter, harness, pcm, transformer, automatic transmission module, shift solenoid, nickel metal hydride battery, body control module, transmission sensor, elm module, pressure control solenoid, transmission control module, electronic control module and a lot more for our precious customers.

Here are some steps which you should follow in order to diagnose this fault code:

Well, a diagnostic trouble code P0A13 is not at all complex to diagnose and mend. All that is actually required is a skilled mechanic who can attentively deal with the error code and the vehicle. Also, one should be careful as this procedure can only be performed with the engine running correctly (without any unmetered air). Also, in the presence of other codes linked to misfiring condition, lean running or air in the engine, it is advised that you must first fix those error codes before treating the error code P0A13.