Error Code P0A09: What It Means & What To Do?

<<See All OBD Codes

What does converter status circuit low mean? What are the common symptoms for P0A09 error code? Is the diagnosis process easy? Is it easy to rectify? If these questions pop up in your mind, then you are at the right place. DC converter status circuit is low means that the engine will refuse to start properly.

The P0A09 error code will be stored in your vehicle if the voltage is reduced on the auxiliary battery and if it is identified by the powertrain control module or the engine control module. The vehicle will be stalling if the DC or DC converter malfunctions. It is possible to charge the auxiliary battery if the high voltage is converted to 12V by the hybrid vehicle converter from the hybrid system. Few areas of the vehicle like vehicle lighting and radio will receive supply power from the high voltage system.

What causes this problem with the DC/DC Converter Status Circuit Low?

• Either the DC or the DC Converter might be defective.
• There might be an opening or short circuit in the DC or DC converter harness.
• The electrical connection of DC or DC converter might be worse.
• The powertrain control module (PCM) might be damaged.

1. DC/DC Converter - An overheating engine is the result of a faulty DC converter. You have to replace them as soon as possible.
2. Engine Wires - One easy way to get rid of the P0A09 error is to remove the damaged or faulty engine wires and replacing them with new ones.
3. Powertrain Control Module - Do you find the powertrain control module to be faulty? Is it broken? Don’t worry. Get the replacement for your powertrain control module from Parts Avatar at best prices online.
4. Car Battery - Check your car battery if it is swollen. A swollen battery can make your engine system malfunction. Replace them with a new battery to avoid P0A09 error.
5. Converter Assembly - Are you looking for a replacement for the damaged converter assembly? Get them from Parts Avatar at best prices online.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0A09 here:

Common Symptoms

• The light will always remain turned on or it will light erratically when the DPF is restored.
• The engine will be slow when you try to accelerate.

Want to correct the Trouble Code P0A09? Read these points mentioned below:

• Replacing the faulty DC or the DC converter.
• Replacing the broken engine wires.
• The powertrain control module has to be replaced.
• The damaged or broken battery needs replacement.
• The inverter or the converter assembly has to be repaired.

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best-priced MAP DC/DC converter, engine wires, powertrain control module, battery, converter assembly, and a lot more to help you out in fixing your car.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

• P0A09 is a generic type of trouble code which is easy to diagnose.
• But it’s always best to leave it to the trained or experienced professionals once this error arises in your vehicle.
• The mechanic will usually begin with a visual inspection of the wires for any possible damages or faults. Any possible damage will be immediately addressed.
• After this, the DC converter and the VCT solenoid will be checked for any damages. Defectives or contaminations. If they are damaged, the mechanic will repair them.
• After this, the mechanic will see if the error code still appears.
• The battery will be carefully checked if it’s swollen. The mechanic will also check if there is any cranking noise from the engine. Such a strange noise and a swollen battery will be immediately rectified.
• If the error still arises, the mechanic will check the powertrain control module. At times a damages powertrain control module can give rise to this error.
• Whenever the mechanic starts with the diagnosis, he will make sure that the engine is in a proper condition which means that there must be no polluted air in the engine.
• If he comes across additional trouble codes like conditions related to misfire, or entering of air into the engine, it will be addressed first by the mechanic prior to the P0A09 error code.

Common Mistakes When Diagnosing the P0A09 Code

• The converter assembly or the inverter might have failed.
• Malfunctioning of the powertrain control module.
• Problematic wires.

P0A08 - DC/DC Converter Status Circuit