Error Code P0949: What It Means & What To Do?

<<See All OBD Codes

The trouble code P0949 can be described as Auto Shift Manual Adaptive Learning Not Complete. The auto shift manual signal from the auto shift manual switch is monitored by the transmission control module. The transmission control module would set the P0949 fault code when the signal from the auto shift manual switch would not be as per the specifications set by manufacturer.

Error code P0949 flashing? Steer to our amazing website for a wide range of automobile parts and accessories. We won’t let you down in any way as for us our customers are everything. Visit us as fast as you can. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

What causes this problem with the Auto Shift Manual Adaptive Learning Not Complete?

• The auto shift manual switch might not be functioning properly
• Auto shift manual harness might be opened or shorted
• There can be inferior electrical connection in the auto shift manual circuit

1. Hydraulic Oil Temperature Sensor - Did your mechanic just found out that there is some fault in the Hydraulic Oil Temperature Sensor? Buy top notch Hydraulic Oil Temperature Sensor from us at economical prices.
2. Engine Oil Pressure Switch - A broken Engine Oil Pressure Switch can cause a lot of issues. It would be nice if you get it replaced on time.
3. Air Pressure Gauge - Everything is fine with the engine control module and still OBD code P0949 flashing? Then there is definitely some fault with the Air Pressure Gauge. Get it checked and replace if needed.
4. Body Control Module Component - Body Control Module Component is an important car part which should never be neglected. May be there is some fault in it due to which P0949 code may start flashing.
5. Oil Pressure Sender - A faulty Oil Pressure Sender can be troublesome. You can always rely on us as we have best auto parts for our customers.
6. Auto Transmission Control Module - P0949 code does not really end up spoiling Oil Pressure Sender, but it might also accompany few Auto Transmission Control Module issues. We have best Auto Transmission Control Module with us.
7. Auto Transmission Shift Solenoid - Are you facing OBD Error Code P0949? Don’t worry as you can fix this issue with new Auto Transmission Shift Solenoid. We care for our customers, that’s why we have Auto Transmission Shift Solenoid for every make and model.
8. Powertrain Control Module - A broken Powertrain Control Module can cause a lot of issues. It would be nice if you get it replaced on time.

We care for our customers and that’s why we can totally understand your problem. That’s the reason why we have listed out some major symptoms behind the flashing up of OBD Code P0949. They are mentioned here as follows:

Common Symptoms

• Visibility in the check engine light

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0949:

• Make sure to mend the faulty electrical connection in the auto shift manual circuit
• Repair or replace the quirky auto shift manual switch
• Rehabilitate the defaults in the auto shift manual harness
• Adjust the flawed PCM/ECM

Now are you thinking that from where will you purchase these car parts? You have arrived at the right place. We at Parts Avatar care for our customers, that’s why we provide best quality of Hurst Shifter, Ecu Car, Automatic Gear Shift, Manual Gearbox, Automatic Gearbox, Automatic Shifter at marketable prices.

Do you wish to diagnose P0949 error code easily? Here are some steps which you should follow in order to diagnose this fault code:

• Just keep one thing in mind that a failure of a gasket cannot be proved with one sign of a faulty gasket.
• But if you find a lot of symptoms, then it would mean that the gasket is surely defective. You should not drive your automobile much if you see such symptoms.
• It all depends upon the symptoms that the gasket should be repaired or restored.
• The overall cost at which a gasket would be restored would always differ from one technician to another.
• It can turn to be expensive to replace a gasket in latest engines because of their location as well as the number of labour which is needed for the replacement.
• The P0949 error code would report some defects in the sensor. This issue can be solved by replacing the sensor.
• This issue is generally caused by the systems which are being monitored by the sensor, but it can also be caused by the wiring of the sensor as well.

Common Mistakes When Diagnosing The P0949 Code

• Negligence in the transmission control module
• Transmission shift points might be out of calibration