Error Code P0941: What It Means & What To Do?

<<See All OBD Codes

The trouble code P0941 can be explicated as Hydraulic Oil Temperature Sensor Circuit Intermittent. The hydraulic oil temperature sensor is being monitored by the transmission control module. This error code would be set by the TCM when the hydraulic oil temperature sensor would not be as per the parameters set by the manufacturer.

The brighter you are, the more you have to learn! That’s why we are here to provide you more knowledge about the P0941 trouble code. The error code P0941 would start triggering when the PCM would detect some fault in the hydraulic oil temperature sensor circuit. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things.

What causes this problem with the Hydraulic Oil Temperature Sensor Circuit Intermittent?

• There can be inoperative hydraulic oil temperature sensor
• There can be opened or shorted hydraulic oil temperature sensor harness
• There can be poor electrical connection in the hydraulic oil temperature sensor circuit
• Quirks in the transmission control module

1. Oil Pressure Sender - OBD Code P0941 can appear because of faulty Oil Pressure Sender.
2. Auto Transmission Control Module - There can be some issues with the Auto Transmission Control Module due to which you may see P0941 code appearing over and over again. Visit us to buy best quality Auto Transmission Control Module online.
3. Body Control Module Component - Are you facing some faults in your Body Control Module Component? Don’t worry and get them replaced or else P0941 code can turn up.
4. Air Pressure Gauge - Common cause behind this P0941 error code can be some fault in Air Pressure Gauge. So it will be a good decision to replace them now.
5. Hydraulic Oil Temperature Sensor - Air Pressure Gauge is perfectly fine but still but having that trouble code P0941 flashing? In such a situation your Hydraulic Oil Temperature Sensor might be faulty. Why don’t you think of getting that replaced?
6. Engine Oil Pressure Switch - The P0941 code can also arise due to some issues in Engine Oil Pressure Switch. So it is advised to replace them as soon as possible.
7. Auto Transmission Shift Solenoid - P0941 code does not really end up spoiling your Engine Oil Pressure Switch, but it might also accompany few Auto Transmission Shift Solenoid issues. We have best Auto Transmission Shift Solenoid with us.
8. Powertrain Control Module - Are you facing OBD Error Code P0941? Don’t worry as you can fix this issue with new Powertrain Control Module. We care for our customers, that’s why we have Powertrain Control Module for every make and model.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0941 here:

Common Symptoms

• Check engine light might come into signal

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0941:

• Make sure to mend the faulty electrical components
• It is essential to restore the flawed vacuum hoses or fittings which could be causing a vacuum leak
• Repair or replace the quirky wiring or connectors
• Clean the cylinder head
• The malfunctioning pump fuses should be repaired or replaced as per the need
• Recondition the non-functioning secondary air injection pump

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced Diesel Particulate Filter, Pressure Control Solenoid, Hydraulic Pressure Sensor, Line Pressure Sensor, Dpf Filter, Diesel Particulate Filter and a lot more to help you out in fixing your car.

If you want to easily diagnose this trouble code, then you must follow the steps which are mentioned here as below:

• The tools that will be required to diagnose a code P0941 are a diagnostic scanner, a digital volt/ohmmeter, and a reliable vehicle information source.
• You can always clear the codes to verify that it is not an intermittent condition. Then the vehicle should be taken out for a road test and then the computer should be scanned once more to see if it returns.
• The air injection pump wiring harness should be carefully examined and at the same time you should check the connections for defects.
• Carefully check the air injection pump wiring harness as well as various other connections.
• Examine the system hoses and fittings for excessive heat damage, as well as other situations which due to which a leakage can be caused.
• The system fuses should be tested properly.
• You can always check the one-way check valves to be sure that air is only able to go through one way.
• Make sure to inspect the secondary air injection system pump.

Common Mistakes When Diagnosing The P0941 Code

• Hydraulic oil temperature sensor might start failing
• Non observance of the transmission control module
• Issues related to the wiring

P0940 - Hydraulic Oil Temperature Sensor Circuit High