P0920 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0920 can be explained as Gear Shift Forward Actuator Circuit/Open. The gear shift forward actuator is being monitored by the transmission control module. This trouble code would be set by the TCM when the gear shift forward actuator would not be as per the specifications set by the manufacturer.

Do you want to know more about the P0920 fault code? Don’t worry! Parts Avatar Canada is here at your service. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

What causes this problem with the Gear Shift Forward Actuator Circuit/Open?

• Gear shift forward actuator harness might be opened or shorted
• Malfunctioning gear shift forward actuator
• Gear shift forward actuator circuit
  
• inferior electrical connection

1. Timing Gear - A faulty Timing Gear can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Auto Transmission Control Module - If everything is alright with PCM, then there is surely some defect in Auto Transmission Control Module. Get it replaced before the situation gets worse.
3. Auto Transmission Shift Solenoid - P0920 code can display due to some issues in the Auto Transmission Shift Solenoid. So it is very important to replace the Auto Transmission Shift Solenoid with us at equitable prices.
4. Automatic Transmission Connector - Do you remember when was the last time you got your car Automatic Transmission Connector checked up? A dirty Automatic Transmission Connector can cause a lot of issues like displaying P0920 code.
5. Engine Control Module - Poor Engine Control Module can cause a lot of difficulties, so why not get it replaced at time?
6. Powertrain Control Module - Are there some faults in your Powertrain Control Module? Don’t waste time and get them replaced or else P0920 code can turn up.

There could be countless symptoms which that would accompany with this fault code. Willing to know some common symptoms of OBD Trouble Code P0920? Your wish is our demand. Have a look at them below:

Common Symptoms

• The service engine soon light can start lighting up
• There can be some issues while shifting into gear
• Not capable of shifting into a forward-moving gear
• Decrease in the overall fuel efficiency

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• It is essential to restore the flawed gear shift forward actuator
• Repair or replace the quirky auto transmission control module
• You must fix the defective engine solenoid valve
• Make sure to mend the faulty powertrain control module

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of planetary gear, battery connectors, car gear, gear module, solenoid engine, gear drive and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0920 code to be stored:

• The P0920 error code can be diagnosed by utilizing an OBD-II trouble code scanner.
• A scanner should be used by a professional technician to notice the freeze frame data, to assemble details about the code.
• The mechanic can also check to see if there is presence of additional trouble codes.
• Now if there are a number of codes, then they should be addressed in the same order in which they are appearing on the scanner.
• After that the mechanic should reset the trouble codes, restart the vehicle, and check to see if the code remains detected.
• If it does not, then the code was likely triggered incorrectly, or represents an intermittent issue.

Common Mistakes When Diagnosing The P0920 Code

• Non performance of the transmission control module
• Problems related to the wiring
• Failure in the gear shift actuator assembly failure