P0784 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0784 can be explained as 4-5 Shift Malfunction. It is the PCM or a stand-alone transmission control module which control the automatic transmissions. The transmission controller uses the input signals from an array of engine and transmission sensors so that it can calculate the transmission shift strategy. The controller then activates the electronic solenoid which would then allow high pressure fluid to flow into the appropriate hydraulic circuit and would allow the transmission to up or down shift as per the need.

We believe that an investment in knowledge pays the best interest. So why not learn more about the P0784 error code? The P0784 error code would start appearing when the powertrain control module would detect some issues in the 4-5 shift function. This would result in the appearance of the check engine light. This trouble code indicates a discrepancy in the gear ratio, which would help in determining how fast or slow a car can go in any specific gear.

What causes this problem with the 4-5 Shift Malfunction?

• Flawed 4-5 shift solenoid
• Issue of electrical short to power
• There can be electrical short to ground
• The ground circuit wiring might be detached or loose connections
• Some quirks in the TCM or PCM

1. Speed Sensor - The P0784 code can also arise due to some issues in Speed Sensor. So it is advised to replace them as soon as possible.
2. Automatic Transmission Sensor- P0784 code does not really end up spoiling your Speed Sensor, but it might also accompany few Automatic Transmission Sensor issues. We have best automatic transmission sensor with us.
3. Automatic Transmission Fluid - Defective Automatic Transmission Fluid can cause a lot of issues. It would be nice if you get it replaced on time.
4. Powertrain Control Module - PCM is perfectly fine but still but having that trouble code P0784 flashing? In such a situation your Powertrain Control Module might be faulty. Why don’t you think of getting that replaced?
5. Body Control Module Component - Are you facing OBD error code P0784? Don’t worry as you can fix this issue with new Body Control Module Component. We care for our customers, that’s why we have Body Control Module Component for every make and model.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0784 here:

Common Symptoms

• Illumination in the malfunction indicator lamp
• Car might not shift from 4th to 5th gear

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• You must rebuild the defective transmission
• Make sure to mend the faulty hydraulic pump
• It is essential to restore the shorted, burned, corroded, or otherwise damaged wiring, connectors, or components
• Rehabilitate the defaults in the shift solenoid
• The malfunctioning PCM should be repaired or replaced as per the need

Parts Avatar Canada endeavours to fulfill all the needs of its consumer, that’s why we have a huge collection of top quality TCM, manual, torque converter, engine light, transmission fluid and many more at equitable prices. We won’t let you down in any way.

Here are some steps which you should follow in order to diagnose this fault code:

• The first and the foremost step which should be done is to check the transmission fluid. If the fluid smells burned or looks strange, the mechanic should remove the transmission pan and look for clutch material or other debris. The presence of debris would indicate that the mechanic needs to rebuild the transmission and then the torque converter should be replaced.
• Then after rebuilding the transmission if needed, the mechanic should fill it with enough fluid to locate and the leaks which are present should be fixed. The mechanic should also check any related wiring, connectors, and components for damage. Finally, the mechanic should fill the transmission fluid to a normal level, clear the P0764 trouble code, and start the vehicle, allowing it to reach a normal operating temperature before taking a test drive to see if the code returns.
• If the code returns, download the freeze frame data and any stored codes before testing the system further. The mechanic should next use a manual pressure pump and a hydraulic pressure diagram to test the pressure of the hydraulic pump. They should compare their findings to the manufacturer's specifications. If the pump checks out as OK, the mechanic should check the reference voltage and ground signal of the faulty shift solenoid.
• If the voltage or ground comes up as open, then any related modules should be disconnected to prevent damage and check for continuity and resistance using the volt/ohmmeter. If the P0784 trouble code returns after clearing the code and retesting the system, then the mechanic should examine the PCM for default. Now once the necessary repairs have been made, the mechanic should clear the trouble code and the entire system should be tested. This is done to see if the code would return back or not.

Common Mistakes When Diagnosing The P0784 Code

Common mistakes while diagnosing this trouble code P0784 are unnecessary and expensive replacements which usually happen when one doesn’t follow all the steps carefully. In this code usually, people replace shift solenoid circuit without even properly diagnosing it.