P0708 - OBD Trouble Code

<<See All OBD Codes

Fearing an OBD error code P0708? Well, not anymore! We at Parts Avatar have it all for you. Here’s how you can simply diagnose and treat the error code P0708. It should be noted that the automatic transmission serves the purpose of collating the engine’s optimum power and torque characteristics to the driver’s desired rate of acceleration and speed by auto selecting various gear ratios or ‘speeds’ to power the wheels. The transmission control module (TCM) and the powertrain control module (PCM) are informed by the transmission range sensor (also regarded as PRNDL input and/or neutral safety switch) about the transmission that whether it is park, reverse, neutral, drive, low, 2nd, 3rd etc. Connected directly to the manual valve of the transmission, so when the shift lever moves from park to drive, the transmission range sensor communicates this important information to the above stated vehicle computer systems.

When the engine control module (ECM) identifies an error with the transmission range sensor the code P0708 is stored.

What causes this problem with the Transmission Range Sensor A Circuit High Input?

• A damaged transmission range sensor
• A wrongly adjusted transmission shift cable/linkage
• Defective or corroded wirings
• A range sensor that is misadjusted
• In a rare case, a failure in the PCM or TCM

1. Transmission Range Sensor - Want to combat your error code P0708? Well, it could be due to a malfunctioning transmission range sensor. Repair or replace it immediately in order to avoid complications caused by the error code.
2. Engine Control Module - Often regarded as the ‘brain’ of the system, a faulty one should be changed as soon as possible in order to fight the problems caused by the error code P0708.
3. Transmission Control Module - A lot of problems could arise due to an erroneous transmission control module. Tune into Parts Avatar for set of top notches TCMs. So, what are you waiting for?
4. Powertrain Control Module - Facing the error code P0708? An inferior quality PCM can always be hazardous for the system also it is one of the primal causes behind the occurrence of the error code P0708. Tune into Parts Avatar for supreme quality PCMs at economical prices.
5. Transmission Valve - Having problems with the transmission valve? Don’t you worry, Parts Avatar has it all. A damaged transmission valve could end up being the root cause behind the Error code P0708.
6. Control Module System - Get your error code fixed instantly with a new control module system. Parts Avatar right place that provides the excellent control module systems across the country.
7. Battery - A weak or corroded battery can be troublesome. Now get your new battery right at your doorstep with Parts Avatar. Log in now.
8. Battery Terminal - A distorted battery terminal can end up being the chief host inviting the error Code P0708. So replacing one can be one of the wisest decisions to avoid a problematic system.
9. Transmission Fluid - Inferior quality or dirty transmission fluid can be problematic. Replace now in order to avoid problems caused by the error code P0708.
10. Transmission Range Switch - Having problems with the transmission range switch? Don’t you worry, Parts Avatar has it all. A faulty transmission range switch could end up being the root cause behind the error code P0708.
11. Wiring Harness - Facing the error P0708? Well, get that fixed with a new wirings and harness available at Parts Avatar online at the best prices.

Our main motive is to achieve customer satisfaction as for us our customers are everything and that’s why we will help you to diagnose P0708 code by mentioning some major symptoms below:

Common Symptoms

• An illuminated check engine light
• Vehicle may fail shift properly
• Vehicle may fail to enter into gear
• Falling fuel economy
• In peculiar cases, the driver may fail to notice any significant adverse effects
• In specific cases, there may be performance problems

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0708:

• The transmission range sensor should be adjusted properly
• Restore or repair transmission range sensor
• All the wirings linked with the transmission range sensor if loose or corroded should be replaced or repaired
• Replace the faulty ECM

However, if you face any issue then we have stocked a wide range of best priced transmission range sensor, ECM, TCM, PCM, transmission valve, control module system, battery, battery terminal, transmission fluid, transmission range switch, wiring harness, engine light and more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this P0708 fault code:

• To begin with, the technician will begin the diagnosis of the error code P0708 by going through and searching the manufacturer’s proposed procedure for adjustment of the transmission range sensor.
• An accurate adjustment should be attempted. Although, if this doesn’t solve the error, the technician should next examine the transmission range sensor carefully following the manufacturer's recommendations.
• While performing the diagnosis replacements should be made if the sensor or any of the wirings are found to be damaged.
• If the code returns back with all the components working in order, an ECM failure should be suspected.