P0702 OBD Error Code: Problem & Solutions
OBD Code P0702 - Transmission Control System Electrical
Baffled?
Don’t know how to diagnose and treat the error code P0702? Well, this brief
guide from Parts Avatar will undoubtedly clear all queries regarding the OBD
code. A constantly flashing P0702 trouble code signals at the powertrain
control module’ (PCM) detection of a malfunction within the automatic
transmission control system. The trouble codes sharing similarities with the
code P0702 are P0701 and P0700.
Learn More about OBD Error Code P0702
A
P0702 trouble code is triggered after a signal being sent to the PCM of a
reading failing to match manufacturer’s specifications. These signals are
transmitted by one of the transmission sensors, solenoids or switches. Also,
the PCM sets in a P0702 trouble code when other transmission-related trouble
codes are stored too.
What causes this problem with
the Transmission Control System Electrical?
- A
malfunctioning transmission control module (TCM)
- The
transmission control module (TCM) harness shorted circuited or open
- A
weak electrical connection in the transmission control module (TCM)
Replace/Repair These Parts to Fix OBD Code P0702
- Transmission Sensor
- Facing the error code P0702? An inferior
quality transmission sensor can always be harmful for the system also it is one
of the primal causes behind the occurrence of the error code P0702. Tune into
Parts Avatar for supreme quality transmission sensor at budget friendly prices.
- Powertrain Control Module - A distorted
PCM can end up being the chief host inviting the error code P0702. So,
replacing one can be one of the wisest decisions to avoid a problematic system.
- Transmission Solenoid - Get your Error Code fixed instantly with a new solenoid. Parts
Avatar right place that provides the best solenoid across the country.
- Transmission Connector - Facing the Error P0702? Well, get that fixed with a new connector
at Parts Avatar available online at the best prices.
Symptoms of OBD Error Code P0702
Concerned
to know the symptoms to OBD code P0702? If yes, then you have landed at the
right place. We at Parts Avatar have listed out few common symptoms associated
with Transmission Control System Electrical
Common Symptoms
- No
obvious symptoms
- A
failure in the transmission
- A
slippage in the transmission
- Excessively
heating transmission
- Problem
in shifting
- Failing
to shift
- Engine
halt when coming to a stop
How to Correct P0702 Transmission Control System Electrical
This
OBD code P0702 serves as an informative code for a various number of problems,
it should be noted that dealing with the other codes first can often fix and
clear the code. Even if the code pops up after fixing all other transmission
problems, the technician should start with the following repairs:
- All
the distorted wiring, connectors, or components should be repaired or replaced.
- The
transmission should be restored by executing a fluid flush, and changing the
torque converter if the transmission has suffered excessive damage for a low
fluid condition that was allowed to go on for too long.
- Moreover,
in a low fluid condition, the transmission should be filled to an appropriate
level to mend any leaks. Afterwards, the technician should fill the
transmission with fluid to the appropriate level.
- Any
damaged sensors, solenoids or switches should be restored or repaired.
- A
malfunctioning hydraulic pump should be attended and replaced.
- The code will end up being stored in a vehicle with a manual transmission, if a faulty PCM is not replaced.
To
do all this, you will need few high quality auto parts such as turbocharger,
exhaust pressure sensor, exhaust pressure control valve, EGR pressure sensor,
turbo, twin turbo kits, oil pressure sensor, turbo kits, oil pressure switches,
electric turbo, turbo diesel and so on. From where will you get them? From your
local store? Well, why go there when you can order quality parts with us while
sitting in the comfort of your home. So, just browse through our website and
order your needed parts today.
- Chevrolet
- Ford
- Dodge
- Pontiac
- Mazda
- GMC
- Acura
- Toyota
- Volvo
- Nissan Datsun
- Hyundai
- Chrysler
- Volkswagen
- Kia
- Honda
- Buick
- Cadillac
- Saturn
- Mitsubishi
- Hummer
- Subaru
- Jeep Truck
Easy Diagnosis of Engine Error OBD Code P0702
In
order to precisely diagnose the error code P0702 the technician will need a
suitable code reader, a manufacturer’ wiring scheme and a digital
volt/ohmmeter. The following should be performed while diagnosing the error
code P0702
- A
visual inspection should be performed of the wirings and the connectors to the
PCM, utilizing the manufacturer’ scheme for guidance.
- The
scanner should be connected to the diagnostic connection to download all the
freeze frame data and codes stored.
- Now that all the wirings, connectors, and components have restored or repaired, the technician should next clear the code and take the vehicle for a test drive to see if the code reappears.
Common Mistakes When
Diagnosing the P0702 Code
Here
listed are a few common mistakes that should be avoided while diagnosing the
error code P0702
A
basic mistake committed leading to a misdiagnose is when the technician
rebuilds the transmission and replaces the torque converter believing that it
would cure the problem. Many a times, a fix can be as simple as replacing the
faulty part or wiring.