P069F - OBD Trouble Code

<<See All OBD Codes

The trouble code P069F can be described as Throttle Actuator Control Lamp Control Circuit. The error code P069F would start triggering when the PCM would detect some fault in throttle actuator control lamp control circuit. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things

The throttle actuator control lamp is a united part of the instrument panel. Its main function is to alert the driver that the throttle actuator control system has exhibited a malfunction (when it is illuminated). It is the throttle actuator control system which performs the function of opening and closing the throttle plate in order to increase/decrease engine RPM as demanded. The P069F trouble code would indicate that a throttle actuator control lamp control circuit which is not as per the predetermined limit has been detected by the ECM. Now when this would occur, the fault code would be stored and there would be an illumination of the malfunction indicator light.

What causes this problem with the Throttle Actuator Control Lamp Control Circuit?

• Defaults in the throttle actuator control lamp
• Throttle actuator control lamp harness might be open or shorted
• Throttle actuator control lamp circuit might have bad electrical connection

1. Engine Control Module - Is your car engine light still staying ON after resetting or your car engine is turning off for no reason? Then these are some common symptoms indicating that your car engine control module is defective.
2. Throttle Actuator Connector - If the throttle actuator connector is faulty, it may result in the throttle pedal not opening in time and causing improper throttle response and sluggish acceleration. Thus, replace it now!
3. Powertrain Control Module - The PCM works as the central computer system in an automobile’s mechanism. This auto part is in charge of all the constituents as well as the functions performed by them. Having such enormous importance in the operation of all the parts means that any defect in it will affect almost every aspect of a car.
4. Throttle Control Relay - The throttle control relay can also be faulty, leading to poor throttle response and rough idles. It may also lead to hesitation during acceleration and deceleration. Thus, replace faulty throttle control relay and buy a new one from us!
5. Electronic Control Unit - The ECU is a major component of your car's onboard computer. It's used to regulate many systems and subsystems in your car's engine, drive train and other major components. Visit us to buy best quality ECU online.
6. Throttle Position Sensor - Are you experiencing sudden idle surges and sudden hesitation while accelerating? Then these are the symptoms of defective throttle position sensor. Get it checked and replace if needed.
7. Diagnostic Tools - Take the help of a professional mechanic to diagnose OBD code error. Use high grade diagnostic tools to resolve this issue. Buy new tools and equipment form us!

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P069F code by mentioning some major symptoms below:

Common Symptoms

• Illumination in the Throttle actuator control lamp
• Throttle actuator control system might not be working properly
• Non functional throttle actuator control lamp 
• Storage of other throttle system codes

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P069F:

• Make sure to mend the faulty throttle actuator control lamp
• It is essential to restore the flawed powertrain control module
• Repair or replace the quirky throttle actuator control lamp harness
• The malfunctioning ECM/PCM should be repaired or replaced as per the need
• Carefully adjust the faults in the throttle actuator control lamp circui 

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of powertrain control module, engine control module, ecm, pcm and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• Use an OBD-II scanner in order to verify that the code is present, and check for other codes for any other type of error or problem that might need attention.
• It is essential to consult your vehicle information source for technical service bulletins (TSB) that replicate the code stored, vehicle (year, make, model, and engine), and symptoms exhibited. If you find the appropriate TSB, it may yield helpful diagnostic information.
• You will require a diagnostic scanner and a digital volt/ohmmeter to accurately diagnose a code P069F. A reliable source of vehicle information will also be required. Begin by connecting the scanner to the vehicle diagnostic port and retrieving all stored codes and freeze frame data.
• You will want to write this information down, just in case the code proves to be an intermittent one. After recording all pertinent information, you should clear the codes and test drive the vehicle until the code is reset or the PCM enters readiness mode.
• If the PCM enters readiness mode, the code is intermittent and will be even more difficult to diagnose. The condition, which caused the P069F to be stored, may need to worsen before an accurate diagnosis can be reached.
• On the other hand, if the code fails to reset and there are no drivability symptoms exhibited, the vehicle can be operated normally. If the P069F is immediately reset, proceed with a visual inspection of system related wiring and connectors.
• You can always utilize your source of vehicle information to obtain connector face views, connector pin-out charts, component locators, wiring diagrams, and diagnostic flow charts associated with the code as well as automobile.
• Carefully inspect to see if there is battery voltage on the fuel pump control circuit by utilizing appropriate wiring diagram and your DVOM. If not, then you should inspect the system fuses and relays and then restore the faulty parts as per the requirement. If there is a fuel pump voltage shutoff switch equipped in your automobile, then check it to make sure that it has not been activated or is faulty.
• If there is no voltage (and/or ground) on the fuel pump control circuit (and all fuses and relays are in good working condition) an examination of controller associated wiring and harnesses are in order. It is also essential to inspect chassis and engine ground junctions. Utilize your vehicle information source to obtain ground locations for associated circuits.
• If there is a presence of voltage present on the fuel pump control circuit, then check the system controllers for signs of water, heat, or collision damage. If there is any controller which is defective, then it should be considered defective. Now if the controller power and ground circuits are intact, then suspect a quirky controller or a controller programming error. Controller replacement might need reprogramming.

Common Mistakes When Diagnosing The P069F Code

• There can be a failure in the instrument cluster
• Defaults in the powertrain control module (PCM)
• Some issues related to the wiring
• Warning light bulb failure