Guide To P069E OBD Error Code Solutions

<<See All OBD Codes

The trouble code P069E can be defined as Fuel Pump Control Module Requested MIL Illumination. This error code means that the powertrain control module (PCM) has detected some fault in the fuel pump control module. It would also give rise to the illumination of the check engine light. The fuel pump control module would be responsible for supply and regulation of voltage to the fuel pump relay as well as the fuel pump. The fuel pump controller is integrated into the powertrain control module but it may also be a stand-alone module. Pressurized fuel is provided for the fuel injection system by the fuel pump. It is most often situated inside the fuel tank but may also be along the fuel rail. Diesel propulsion systems most often utilize high pressure pumps that are mounted on and driven by the engine

1. Engine Control Module - There can be some engine performance issues due to faulty engine control module. If the ECM fails or has any problems it can lead to performance issues with the vehicle like misfires, hesitation, loss of power, and sometimes even decreased fuel economy.
2. Fuel Pressure Regulator - Faulty fuel pressure regulator can lead to black smoke emitting from the tailpipe along with fuel leaks from tailpipe, engine not running smoothly and stalling, and problems to the transmission system. Thus, replace it now!
3. Powertrain Control Module - PCM stands for powertrain control module. It is a car part, a control unit which is utilized on motor vehicles. It is generally a combined control unit, consisting of the engine control unit (ECU) and the transmission control unit (TCU)
4. Fuel Injector - If there is a leakage in the fuel injectors, then it might cause a rise in the fuel consumption, fuel odours around the vehicle and hard starting. You can always rely on us as we have best auto parts for our customers.
5. Electronic Control Unit - If your automobile's check engine light remains on constantly, and never goes off, there's a good chance that your vehicle has a damaged electronic control unit. There are a lot of reasons why a car's check engine light will remain on. The most common reason is a defective ECU.
6. Diagnostic Tools - It is always advisable to use the correct tools and equipment while resolving any OBD code issue as even small mistakes can lead to wrong diagnosis. Thus, always take help from a professional who has the knowledge and experience to such tools in an efficient manner. Buy new quality diagnostic tools from us today!

Our main motive is to achieve customer satisfaction as for us our customers are everything and that’s why we will help you to diagnose P069E code by mentioning some major symptoms below:

Common Symptoms

• The service engine soon light can start lighting up
• Reduction in the engine performance
• Expansion in the fuel consumption
• Car engine might start stalling
• Fluctuation in the idle speed

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P069E:

• Repair or replace the quirky FPCM or ECM
• Rehabilitate the defaults in the fuel pressure sensor
• The fuel pump should be restored to working order
• Recondition the non-functioning fuel pressure relay
• Adjust the flawed wiring

However, if you face any issue then we have stocked a wide range of best priced fuel pump, fuel pressure sensor, fuel pressure relay, ecm, pcm, pcm module, ecm module and more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

It is essential to consult your vehicle information source for technical service bulletins (TSB) that replicate the code stored, vehicle (year, make, model, and engine), and symptoms exhibited. If you find the appropriate TSB, it may yield helpful diagnostic information.

You will require a diagnostic scanner and a digital volt/ohmmeter to accurately diagnose a code P069E. A reliable source of vehicle information will also be required. Begin by connecting the scanner to the vehicle diagnostic port and retrieving all stored codes and freeze frame data.

You will want to write this information down, just in case the code proves to be an intermittent one. After recording all pertinent information, you should clear the codes and test drive the vehicle until the code is reset or the PCM enters readiness mode.

If the PCM enters readiness mode, the code is intermittent and will be even more difficult to diagnose. The condition, which caused the P069E to be stored, may need to worsen before an accurate diagnosis can be reached.

On the other hand, if the code fails to reset and there are no drivability symptoms exhibited, the vehicle can be operated normally. If the P069E is immediately reset, proceed with a visual inspection of system related wiring and connectors.

You can always utilize your source of vehicle information to obtain connector face views, connector pin-out charts, component locators, wiring diagrams, and diagnostic flow charts associated to the code as well as automobile.

Carefully inspect to see if there is battery voltage on the fuel pump control circuit by utilizing appropriate wiring diagram and your DVOM. If not, then you should inspect the system fuses and relays and then restore the faulty parts as per the requirement. If there is a fuel pump voltage shutoff switch equipped in your automobile, then check it to make sure that it has not been activated or is faulty.

If there is no voltage (and/or ground) on the fuel pump control circuit (and all fuses and relays are in good working condition) an examination of controller associated wiring and harnesses are in order. It is also essential to inspect chassis and engine ground junctions. Utilize your vehicle information source to obtain ground locations for associated circuits.

If there is a presence of voltage present on the fuel pump control circuit, then check the system controllers for signs of water, heat, or collision damage. If there is any controller which is defective, then it should be considered defective. Now if the controller power and ground circuits are intact, then suspect a quirky controller or a controller programming error. Controller replacement might need reprogramming.

Common Mistakes When Diagnosing The P069E Code

• Common mistakes while diagnosing this trouble code are unnecessary and expensive replacements which usually happens when one doesn't follow all the steps carefully.
• The most common mistake while diagnosing this code is missing out on diagnosing steps which further leads to the expensive and unnecessary replacements. It is always recommended to seek the help of experienced diagnostician to avoid any mistakes..