Error Code P0698: What It Means & What To Do?

<<See All OBD Codes

If an issue would be detected by the powertrain control module or another control module in the sensor reference voltage "C" circuit, then it would give rise to the P0698 trouble code.

The error code P0698 can be defined as Sensor Reference Voltage “C” Circuit Low.

Do you want to gain some more knowledge about the P0698 trouble code?

The PCM might detect an irregular voltage level or connectivity problem relating to the electrical circuitry. Here the sensor reference voltage "C" circuit indicates a particular area of the sensor reference voltage circuit system which is defective. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

What causes this problem with the Sensor Reference Voltage “C” Circuit Low?

• Faults in the circuit-related wiring
• There can be corroded, broken, disconnected or quirky connectors as well as wiring
• Flaws in the powertrain control module

1. Electronic Control Unit - Did your mechanic just found out that there is some fault in the Electronic Control Unit? Buy top notch Electronic Control Unit from us at economical prices.
2. Electric Cooling Fan - A broken Electric Cooling Fan can cause a lot of issues. It would be nice if you get it replaced on time.
3. Radiator Fan Assembly - Everything is fine with the engine control module and still OBD code P0698 flashing? Then there is definitely some fault with the Radiator Fan Assembly. Get it checked and replace if needed.
4. Engine Control Module - Engine Control Module is an important car part which should never be neglected. May be there is some fault in it due to which P0698 code may start flashing.
5. Powertrain Control Module - A faulty Powertrain Control Module can be troublesome. You can always rely on us as we have best auto parts for our customers.
6. Automatic Transmission Sensor - P0698 code does not really end up spoiling your Powertrain Control Module, but it might also accompany few Automatic Transmission Sensor issues. We have best Automatic Transmission Sensor with us.
7. Auto Transmission Shift Solenoid - Are you facing OBD Error Code P0698? Don’t worry as you can fix this issue with new Auto Transmission Shift Solenoid. We care for our customers, that’s why we have Auto Transmission Shift Solenoid for every make and model.

We care for our customers and that’s why we can totally understand your problem. That’s the reason why we have listed out some major symptoms behind the flashing up of OBD Code P0698. They are mentioned here as follows:

Common Symptoms

• The service engine soon warning light can start flashing up

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0698:

• Make sure to repair or replace the electrical connectors, wiring and any components related to the "C'" circuit
• Carefully test the vehicle following any repairs

Now are you thinking that from where will you purchase these car parts? You have arrived at the right place. We at Parts Avatar care for our customers, that’s why we provide best quality of northern radiator, solenoid car, shift solenoid, electric radiator fan, pressure control solenoid, pcm computer, car cooling fan at marketable prices.

Do you wish to diagnose P0698 error code easily? Here are some steps which you should follow in order to diagnose this fault code:

• A P0698 code may be initially diagnosed by reading the trouble code via an OBD-II code reader. Because this code is often the result of an electrical connectivity failure, 
• Carefully inspect the wiring and electrical connectors for signs of fault, damage, corrosion and disconnection
• Test each of the control modules that may have reported the concern as per the manufacturer’s specifications

Common Mistakes When Diagnosing The P0698 Code

• Make sure that the trouble codes are approached and fixed in the same order in which they have been reported