Guide To P0692 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0692 can be defined as Cooling Fan 1 Control Circuit High. This code would start indicating when the powertrain control module would detect an incorrect amount of voltage, which can be high or low in the electric cooling fan control circuit.

Want to learn something more about this fault code?

This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another.

What causes this problem with the Cooling Fan 1 Control Circuit High?

• There can be opened or shorted fan 1 harness
• Bad electrical connection in the fan 1 circuit
• Defaults in the fan 1 relay
• Fan 1 relay harness might be open or shorted
• There can be bad electrical connection in the fan 1 relay circuit
• Quirks in the fan 1 
• Some flaws in the engine control module

1. Electric Cooling Fan - A faulty Electric Cooling Fan can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Powertrain Control Module - If everything is alright with Electric Cooling Fan, then there is surely some defect in Powertrain Control Module. Get it replaced before the situation gets worse.
3. Electronic Control Unit - P0692 code can display due to some issues in the Electronic Control Unit. So it is very important to replace the Electronic Control Unit with us at equitable prices.
4. Engine Control Module - Do you remember when was the last time you got your car Engine Control Module checked up? A faulty Engine Control Module can cause a lot of issues like displaying P0692 code.
5. Automatic Transmission Sensor - Poor Automatic Transmission Sensor can cause a lot of difficulties, so why not get it replaced at time?
6. Radiator Fan Assembly - Are there some faults in your griffin radiator? Don’t waste time and get them replaced or else P0692 code can turn up.
7. Auto Transmission Shift Solenoid - OBD Code P0692 can appear because of faulty Auto Transmission Shift Solenoid. 

There could be countless symptoms which that would accompany with this fault code. Willing to know some common symptoms of OBD Trouble Code P0692? Your wish is our demand. Have a look at them below:

Common Symptoms

• Radiator fan may stop working properly
• Issue of car engine overheating
• Illumination of the service engine soon warning light 

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• If you find out that there are some faults in the fan 1 relay, then it should be replaced
• Repair or replace the fan 1 relay harness
• You can always correct the poor electrical connection in the fan 1 relay circuit
• Replace the defective engine control module

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of northern radiator, solenoid car, shift solenoid, electric radiator fan, pressure control solenoid, pcm computer, car cooling fan and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0692 code to be stored:

P0692 can be diagnosed by using an OBD-II scanner, digital ohm meter and an infrared thermometer. Diagnosing this can be somewhat challenging without knowing the manufacturer's specs regarding cooling fans for the engine and the air conditioner.

After that a scanner is used by the mechanic or technician to activate the engine fan and check voltage and grounding of the fan motor. No voltage means the system fuses must then be tested, and if the fuses are acceptable, the fan relay must be checked.

The voltage at the connector must be within parameters of the manufacturer. The engine temperature readings must then be tested and if not within the manufacturer specs, it is likely a defective engine coolant temperature sensor. Generally, the source of the code would be revealed by the series of tests. Then the mechanic will repair an open or shorted circuitry as detected by the diagnostics before rechecking with the scanner

Common Mistakes When Diagnosing The P0692 Code

• The engine cooling fan control module might start failing
• There can be some defects in the engine cooling fan
• Quirks in the engine cooling fan relay
• Failure in the powertrain control module
• Some issues related to the wiring

P0691 - Fan 1 Control Circuit Low