P0633 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0633 can be described as Immobilizer Key Not Programmed – ECM/PCM. The P0633 fault code would start appearing when the powertrain control module or the engine control module would not be able to recognize the immobilizer key.

Don’t worry if P0633 error code is triggering again and again. We offer wide range of auto parts at affordable prices to our dear customers. If there would be some internal defects or the programming is not proper, then it would result in the PCM not be able to recognize the immobilizer key. This would result in the appearance of the P0633 fault code. The immobilizer is an engine constituent which would prevent it from running without the right electronic immobilizer key. This error code would indicate that the automobile would not be able to begin because the proper key might not be in use.

What causes this problem with the Immobilizer Key Not Programmed – ECM/PCM?

• The immobilizer key battery might be weak
• Imperfect immobilizer key
• Replacement of the immobilizer key
• Issue of ECM/PCM programming error
• ECM/PCM might be restored without being properly programmed
• ECM/PCM might not be functioning properly

1. Electronic Control Unit - Do you remember when was the last time you got your car Electronic Control Unit checked up? A dirty Electronic Control Unit can cause a lot of issues like displaying P0633 code.
2. Automatic Transmission Module - Poor Automatic Transmission Module can cause a lot of difficulties, so why not get it replaced at time?
3. Engine Control Module - Are there some faults in your Engine Control Module? Don’t waste time and get them replaced or else P0633 code can turn up.
4. Dash Check Engine Light - Everything is fine with Engine Control Module and still P0633 code triggering? Then you must get your Dash Check Engine Light checked.
5. Powertrain Control Module - There can be some issues with the Powertrain Control Module due to which you may see P0633 code appearing over and over again. Visit us to buy best quality PCM online.
6. Scanner - Are you searching for some top-quality scan tools online for your automobile? Wait no more! We are here to help you out.

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0633 code by mentioning some major symptoms below:

Common Symptoms

• No start conditions might exist
• Disabled lock/unlock functions
• There might be an activation of the vehicle security system
• Flashing up of some other diagnostic codes

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0633:

• The ECM/PCM programming error should be restored to working order
• It is necessary to perform proper service of the unsound immobilizer key
• Adjust the flawed immobilizer key battery

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of exhaust pressure sensor, exhaust pressure control valve, turbo kit, oil pressure switch and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• An OBD-II trouble code scanner should be used to diagnose the P0633 fault code. A scanner should be used by a professional technician to notice the freeze frame data, to assemble details about the code. The mechanic can also check to see if there is presence of additional trouble codes. Now if there are a number of codes, then they should be addressed in the same order in which they are appearing on the scanner.
• After that the mechanic should reset the trouble codes, restart the vehicle, and check to see if the code remains detected. If it does not, then the code was likely triggered incorrectly, or represents an intermittent issue. Clear the codes and then run the vehicle to check if its returns. This would be very helpful in determining if the malfunction is intermittent or not.
• Once the codes have been cleared up, then the vehicle should be taken out for a test drive to check if the codes return. It can be quite challenging to diagnose the intermittent conditions and in some extreme situations it might get worse before attempting the right diagnosis. The latest OBD-II systems are programmed in such a way that they function in only one specific automobile. The automobiles pertinent data is programmed into the PCM.
• This would then be shared with the other control modules via the CAN bus network. Now if there is a replacement of the control module, then make sure to reprogram it to match the automobile. The process of reprogramming the control module includes the type of vehicle, its identification number, mileage as well as anti theft settings.

Common Mistakes When Diagnosing The P0633 Code

• Anti-theft control module related issues
• Key in use might not be programmed to the automobile
• Issues related with the car wiring