P0626 - OBD Trouble Code

<<See All OBD Codes

Alarmed to see the code P0626 flashing? Don’t worry, Parts Avatar to the rescue! Here’s how you can solve the complicated Error code P0626. This generic powertrain code P0626 is the OBD-II code for an error that has been observed in the generator field circuit. The code P0626 is most likely triggered due to a defective alternator or generator control module. Also, the powertrain control module identifies a fault that may involve other vital parts of the powertrain receiving inadequate electrical power. A number of modules within the OBD-II system can detect this fault apart from the powertrain control module also. These consists the instrument panel control module, traction control module, and anti-lock brake control module.

Through the vent holes visible on most of the alternators, the field coil is probably the most recognizable from its windings. The field coils envelopes the generator armature and remains static in the alternator housing. Using the battery voltage, the armature that spins insides the field coil is energized. Every time the engine is turned on, the field coil receives power. The role of controlling the continuity and voltage level of the general field circuit while the engine is running is played by the PCM. The generator field coil is essential to generator operation as it also regulates the battery charge levels. If there is a malfunction detected while controlling the generator field circuit, a code P0626 is set. A malfunction indicator lamp (MIL) also illuminates at times. Varying and depending upon the observed intensity of the problem, multiple failure cycles may be required for MIL illumination.

What causes this problem with the Generator Field/F Terminal Circuit High?

• Damaged alternator
• Defective battery
• Error or possibly a burnt generator control module circuit
• Loose or corroded wirings somewhere inside the vehicle
• Bad connection between generator control module and powertrain control module

1. Alternator - Having problems with the alternator? Don’t you worry, Parts Avatar has it all. A faulty alternator could end up being the root cause behind the Error code P0626.
2. Battery - A distorted battery can end up being the chief host inviting the error Code P0626. So, replacing one can be one of the wisest decisions to avoid a problematic system.
3. Voltmeter - Facing the error code P0626? An inferior quality voltmeter can always be disastrous for the system also it is one of the primal causes behind the occurrence of the error code P0626. Tune into Parts Avatar for supreme at economical prices.
4. Automatic Transmission Module - Facing issues with the automatic transmission module? Don’t you worry, Parts Avatar has it all. A defective transmission module could end up being the primal cause behind the error code P0626.
5. Engine Control Unit - Fearing an error code P0626? Well, it can persist for long due to a distorted engine control unit, so it is advised to get an unsound one replaced instantly.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0626 here:

Common Symptoms

The symptoms of the error code P0626 include a discharged battery, drivability problems, harsh shifting, diminishing fuel economy, the engine may stall or run rough at idle, bad acceleration, a stored trouble code, and possibly an illuminated service engine soon lamp. If this code sets in, and a service engine soon lamp has not yet been lightened, the code may appear as unresolved.

• Charging system lamp illuminated
• Engine drivability problems
• A careless engine turns off
• A delay in the engine cranking
• Other various stored codes

Want to correct the Trouble Code P0626? Read these points mentioned below:

• The generator field circuit should be repaired or replaced
• Restore wiring harness surrounding the alternator and generator control module
• Change or repair the wirings and connections around powertrain control module
• Change vehicle battery

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced alternator, battery, voltmeter, shift solenoid, body control module, electronic control module, transmission control module, pressure control solenoid and a lot more to help you out in fixing your car.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0626 code to be stored:

A trained mechanic will start by using an OBD-II code scanner and a voltmeter to diagnose the underlying problems that triggered the P0626 code within the OBD-II system. The mechanic will be able to look at the code and see when it first occurred. After observing this, the mechanic will reset the code and test drive the vehicle. If there is an actual fault and not just an intermittent fault, then the code will set in again during the test.

If it happens, the circuitry will be investigated for any possible signs of damage or corrosion. The wiring harness surrounding the generator field circuit may require to be replacements along with parts of the circuitry itself. A voltmeter will be used to differentiate the power transmitting through the circuit to the factory settings.

Common Mistakes When Diagnosing the P0626 Code

Fearing a misdiagnose? Well, no worries! We have listed here a few common mistakes that should be avoided –

Most of the times the complications with the engine performance that appear due to the problem of inadequate electrical power are treated before the defect on the generator field is detected. This leads to wastage of time diagnosing a bad fuel delivery, ignition timing or complications with the brakes or traction control. These issues may just vanish once the generator field circuit is repaired.

P0625 - Generator Field/F Terminal Circuit Low