P0624 OBD Error Code: Problem & Solutions

<<See All OBD Codes

Fearing an error code P0624? Well, we are here at your service! Here’s how you can simply solve and treat this Error code. This code signals a fault has been found in the fuel cap lamp control circuit. One of the other supporting control modules or the PCM hold the responsibility of detecting this error. These control modules often include the alternative fuel control module, the body control module, the anti-lock brake control module, the instrument panel control module, the fuel injection control module, the turbo control module, the anti-theft module, the cruise control module, the traction control module, proximity alert module, and the climate control module (but not limited to these only).

When the key is initially turned on, the fuel cap warning light should lighten up for a few seconds. If the warning light fails to turn on, the engine control module (PCM) sets the code P0624.

What causes this problem with the Fuel Cap Lamp Control Circuit?

• A possible fault in the PCM
• A PCM programming error
• The fuel cap lamp control circuit shorted or open
• Damaged, disconnected, or missing fuel caps
• An unsound or malfunctioning fuel cap warning lamp bulb

1. Powertrain Control Module - looking for a superior quality powertrain control module to combat the error code P0624? Well, you can now replace your PCMs from Parts Avatar providing across the country. We’re just a click away!
2. Scanner - Facing the error code P0624? Defective scanners can always be problematic for the system also it is one of the primal causes behind the occurring of the error code P0624. Tune into Parts Avatar for excellent quality Scanners at economical prices.
3. CAN Bus Tester - Having problems with the CAN bus tester? Don’t you worry, Parts Avatar has it all. A faulty CAN bus tester could end up being the root cause behind the Error code P0624.
4. Automatic Transmission Sensor - Having problems with the automatic transmission sensor? Don’t you worry, Parts Avatar has it all. A faulty automatic transmission sensor could end up being the root cause behind the Error code P0624.
5. Engine Control Unit - A lot of issues can arise due to a malfunctioning engine control unit. So, gets your changed or repaired now in order to fight the error code P0624.

Willing to know some common symptoms of OBD code P0624? Your wish is our demand. Have a look at them below:

Common Symptoms

The Symptoms indicating an Error code P0624 consist of the following: a stored trouble code, an illuminated fuel cap malfunction lamp, and possibly a lightened service engine soon lamp. If this code is sets in, and a service engine soon lamp has not yet been lightened up, the code may end up being shown as unsolved.

• Deteriorating fuel efficiency
• A deactivated evaporative emissions system
• Other various stored codes

We have listed out some ways which would help you to correct the occurrence of OBD Code P0624. They are mentioned here as follows:

• The code should be verified using a scanner and with all the data retrieved, the technician should begin addressing the problems that may have led for the code to appear
• The codes should be cleared and retested to see if it reappears, next, following this visually inspect the wirings and connections. Anything requiring a repair or a replacement should be duly attended
• If these generic fails to clear the code, it is crucial to consider testing the individual control modules
• The use of a CAN bus tester such as an Auto hex or Tech II will help detect the area where the problem has occurred. Then it may signal at replacing the fuel cap, the control circuits or connections, or the CAN bus itself to further avoid complications

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of PCM, scanner, CAN bus tester, shift solenoid, body control module, electronic control module, transmission control module, pressure control solenoid, transmission shift solenoid, brake control module and many more. Now all your problems would vanish within no time.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

In order to determine the P0624 code, the technician should begin using an OBD-II scanner and retrieve the data and freeze frame data. Then, next the fault codes should be cleared to see if the code reappears. If it does set back, a visual inspection of the wirings should be performed to actuate if there are any issues, and then replace or repair the components and connections as required.

Again, the code should be retested to see if it prevails. If it does, begin with an in-depth electronic diagnosis using a device such as an Auto hex or Tech II to detect the area where the electronic malfunction is occurring or where a defective system ground exists.

Common Mistakes When Diagnosing the P0624 Code

Fearing a misdiagnose? Well, not anymore! We have listed out a few common mistakes that should be avoided while diagnosing and treating the Error code P0624:

A generic mistake made while diagnosing the P0624 code is to presume that any stored codes in the freeze frame are the root cause of this code. This can easily mislead you to make unrequired or ineffective repairs. Thorough diagnostics on the CAN Bus is often a wiser approach than operating solely on the basis of scan readings.