P0548 - OBD Trouble Code

<<See All OBD Codes

A P0548 is an OBD-II generic code that means there is an issue with the exhaust system gas temperature sensor. The PCM would detect the voltage changes in the sensor and would then interpret the data as exhaust gas temperature. The powertrain control module can then alter the ignition timing or air to fuel ratios in order to decrease the exhaust gas temperature as a way of preserving the catalytic converter. If the voltage would be outside the parameters of the manufacturer, then the trouble code P0548 would start triggering up.

Do you want to know something more about the P0548 error code?

The error code P0548 can be defined as Exhaust Gas Temperature Sensor Circuit Low Bank 2 Sensor 1. If the powertrain control module will figure out some defect in the exhaust gas temperature sensor circuit, then it would give rise to the P0548 trouble code.

What causes this problem with the Exhaust Gas Temperature Sensor Circuit Low Bank 2 Sensor 1?

• The exhaust gas temperature sensor might have an internal short
• Terminals and connectors might be broken, burnt, corroded or loose
• Flaws in the sensor
• There can be extreme exhaust leak upstream of the sensor
• Use of aftermarket exhaust systems may create back pressure

1. Engine Control Module - Defective car Engine Control Module can be a major reason why P0548 code depicts. So, make sure to replace it online so that you don’t have to face any further issues.
2. Oxygen Sensor - Everything is okay with the Engine Control Module and still OBD code P0548 triggering? Then there must be some defects in Oxygen Sensor. Replace them as soon as possible.
3. Catalytic Converter - P0548 code flashing? Get your Catalytic Converter inspected from a mechanic.
4. Air Fuel Ratio Sensor - If everything is alright with PCM, then there is surely some defect in Air Fuel Ratio Sensor. Get it replaced before the situation gets worse.
5. Exhaust Muffler - P0548 code can display due to some issues in the Exhaust Muffler. So, it is very important to replace the Exhaust Muffler with us at equitable prices.
6. Powertrain Control Module - Do you remember when was the last time you got your car Powertrain Control Module checked up? A defected Powertrain Control Module can cause a lot of issues like displaying P0548 code.

You might be thinking that how would you diagnose these problems? We at Parts Avatar Canada would help you diagnose the major symptoms easily.

Common Symptoms

• Flashing up of the check engine light

The repairs which you will have to do to correct this fault code are simply straightforward; you can surely pinpoint the necessary repairs on the basis of your diagnosis. Have a look at some common fixes:

• You can always repair or replace the electrical components and then retest them
• Correct the flaws in the sensor
• There can be extreme exhaust leak upstream of the sensor, so make sure that you get it repaired properly
• Replace the exhaust gas temperature sensor
• The PCM’s continuity can be tested, and it can also be replaced as per the requirement

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of Ohmmeter, Egt, Exhaust catalyst and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• The mechanic will use an OBD scanner to diagnose the P0548 trouble code
• The next step would be to clear all the codes
• Then the freeze frame data is noted down and when the issue appears, dealing with any other codes that may be underlying causes.
• Then a visual inspection of wires and connections is done, making sure to repair or replace all loose, corroded, damaged or disconnected components before retesting to see if the code is still appearing
• Look at the exhaust circuitry near the hottest points of the exhaust system and do a check of the sensor’s resistance and voltage. A heat gun is used to heat the sensor and then it may be replaced. The technician may also test the PCM and replace that if needed

Common Mistakes When Diagnosing The P0548 Code

• The technician might make a mistake that both the oxygen sensors as well as exhaust gas temperature sensors are contained in a single unit
• The P0548 error code can trigger up because of some faults in the exhaust sensor and a mechanic might make a big mistake of replacing the oxygen sensor