P0519 - OBD Trouble Code

<<See All OBD Codes

Love travelling but fear the OBD error codes? Well, not anymore! You have got our back. Parts Avatar not only believes in providing superior quality products but also help the customers throughout. Here’s a brief that’s definitely going to help you apprehend and combat the error code P0519. This generic trouble code is defined as idle air control system performance. The idle control system monitors the engine idle speed. In order to increase or decrease the engine idle speed, the engine control module (PCM), opens or closes the idle air control valve to allow more or less air into the engine. When the PCM fails to receive the desired RPM, it sets the code P0519.

While a vehicle idles, it still retains a certain predetermined RPM stated by the manufacturer. The powertrain control module (PCM) manages this RPM to assure it correctness and accuracy required. There is a specified acceptable range and if the RPM goes above or below it, the PCM responds by trying to fix it. If it fails to do, the code P0519 is stored.

What causes this problem with Idle Air Control System Performance?

• Faulty IAC motor/valve
• Leakage in the Engine vacuum
• IAC control wirings or connectors open or shorted
• Carbon clogging up in the throttle body or IAC valve
• Defective PCM or error in the PCM programming

1. Motor/Valve - Want to fight the error code P0519? An inferior quality or damaged motor/valve can always be harmful for the system also it is one of the primal causes behind the occurrence of the error code P0519. Tune into Parts Avatar for excellent quality motor/valve at the prices you have been looking for.
2. Engine Vacuum - Engine vacuum can be very problematic and it always adds to the complications caused by the error code P0519. So, get yours fixed as soon as possible.
3. Control Wiring or Connectors - Weary and damage control wirings or connectors can often be troublesome. So, to add some spark to your ride you definitely need the superior quality wirings and connectors offered at Parts Avatar. Isn’t that just the perfect deal?
4. Powertrain Control Module - A distorted powertrain control module can end up being the chief host inviting the Error Code P0519. So, replacing one can be one of the wisest decisions to avoid an erroneous system.
5. Coolant Temperature Sensor - Get your error code solved instantly with a new coolant temperature sensor because a faulty one can be troublesome.

Want to know the symptoms of the OBD code P0519? If yes, then you have landed safely at the right place. We at Parts Avatar have listed out a few general symptoms associated with the Idle Air Control System Performance.

Common symptoms

• Increased engine RPM level
• Engine halts, specially at idle
• Strange noises from the throttle body area
• Various other codes related to IAC

Have a look at some ways with which you can correct the P0519 code:

Many a times all it takes is a basic cleaning of the throttle bore body or the wiring and the connecters for the air control system to work properly. As stated above, the most common reason triggering the code could be the throttle body being blocked by carbon. So, the repair may only require a thorough cleansing of this component. Also, at times it could also be triggered due to a large vacuum leak, which most likely replacement. If the idle air control valve is broken or damaged, it will also require replacements and repairs.

Still worried? Well, there is no need to be worried if your OBD code is still flashing as we are he4re at your service. Have a look at our wide range of products like the motor/valve, engine vacuum, control wiring or connectors, powertrain control module, air temperature sensor, coolant level sensor, brake control module, fuel injection pump and many more. Now all your worries will vanish within a few seconds.

• To start with, the technical service bulletins (TSB) for that particular vehicle should be checked. The issue may be a known issue with a known fix put out by the manufacturer and can save you time and money while performing the diagnosis
• To diagnose the code P0519, a diagnostic scanner, a digital volt/ohmmeter (DVOM) and a reputable vehicle information source would be required. (All the DIY will do)
• One should begin by examining all the IAC system wirings and connectors and repairs should be performed of the components that are damaged, burnt or disconnected. The engine should be checked for any vacuum leaks that might end up adding to an uncontrollable engine RPM level
• If any vacuum leaks are detected, they should be repaired and the system should be rechecked. Next the scanner should be connected to the vehicle diagnostic connector and all the stored codes and freeze frame data should be restored. In this case the code is intermittent
• The codes should be cleared and the vehicle should be test driven to see if the code resets. Also, if there are any other codes related to to the IAC stored, you need to diagnose and repair those first. Also, all the technical service bulletins and safety recalls should be checked for the vehicle and the malfunction in question
• After performing all the repairs, the vehicle should again be tested normally to allow the PCM to enter readiness mode before declaring the problem rectified. As an easy method for testing the IAC system, when the engine idle RPM is very high, carefully (to protect the gasket or seal) unbolt the IAC valve from the engine and use a shop rag and fingers to control engine RPM at idle
• If you can control a high idle condition, after removing the IAC valve, then know that the IAC system is not functioning properly. If the RPM at idle can’t be controlled, suspect the presence of a large vacuum leak. Large engine vacuum may include PCV valve/hoses, vacuum hoses, vacuum brake booster, check valve, or hoses, EGR valve stuck open, EGR gasket leak, or an intake manifold gasket leak. The vehicle information source should be consulted for any recommended method of testing the IAC motor with the DVOM. the IAC motor/valve should be replaced if it does not comply with the manufacturer's specifications

Common mistakes when diagnosing the OBD Code P0519

A major common mistake committed by a lot of mechanics while diagnosing and treating the error code P0519 is that they immediately replace the idle air control part. While what should actually be done is to perform a thorough cleansing of the throttle body bore first. Otherwise, there are increased chances of a misdiagnose.

P0518 - Idle Air Control Circuit Intermittent