Error Code P0516: What It Means & What To Do?

<<See All OBD Codes

Hate halts like we do? Don’t worry, we are at your service! This brief guide of the error code P0516 is definitely going to help you comprehend and fight the complications caused. This generic trouble diagnostic code signals a problem when the engine control module (PCM) a observes a temperature reading lower than the current specifications from the manufacturer. The battery temperature sensor further informs the engine control module (PCM) about the temperature of the battery in order to avoid the battery from heating excessively. When the PCM detects an incorrect signal recorded by the sensor it ends up setting the code P0516.

In order to assure the battery’s accurate operation and charging, the battery temperature sensor is monitored by the PCM. the battery voltage is noted to be inversely proportional to the temperature: the higher the voltage, the colder the temperature reading will be. Also, if the PCM detects a temperature reading that is too low, the battery voltage recorded will be very high therefore signalling at its bad operating levels. In such a case the error code P0516 is set.

What causes this problem with Battery Temperature Sensor Circuit Low?

Here listed are a few general problems that lead to the OBD error code P0516 and are associated with the battery temperature sensor circuit:

• Possibly a short to ground in the signal circuit to the battery temperature sensor
• A failure in the battery temperature sensor
• In a rare case, failure in the PCM

1. Battery Temperature Sensor - Facing the error code P0516? An unsound or broken battery temperature sensor can always be hazardous for the system, also it is one of the primal causes behind the occurring of the error code P0516. Tune into Parts Avatar for superior quality Battery temperature sensor at economical prices.
2. Engine Control Module - also titled as the ‘brain’ of the engine management. The ECM controls the fuel system, the emission timing etc. so a faulty one should be changed instantaneously to further avoid complications caused by the error code P0516.
3. Battery - Having problems with the battery? Don’t you worry, Parts Avatar has it all. A defective battery can always end up being the root cause behind the error code P0516. So, get yours changed now from Parts Avatar.
4. Indicator Lamp - A faded or a dimmed indicator lamp is always problematic and causes trouble in fighting the OBD Error code P0516. So, what are you waiting for? We are just a click away!
5. Indicator Light - Get your error code fixed instantly with a new Indicator light. Parts Avatar is just the right place that offers the premium quality indicator lights across the country. Tune in now!
6. Connector - Weary and damage connectors can often be problematic. So, to add some spark to your ride you definitely need the superior quality connectors offered at Parts Avatar. Isn’t that just the perfect deal?
7. Wiring - Disconnected or shortened wirings lead to bad connections that can lead to an erroneous system. Amendments or repairing should be made to fight the issues caused by the error code P0516.
8. Wiring Harness - A distorted wiring harness can end up being the chief host inviting the error Code P0516. So, replacing one can be one of the wisest decisions to avoid a problematic system.
9. Terminals - Facing the Error P0516? Well, get that fixed with a new terminal at Parts Avatar available online at the best prices.
10. Powertrain Control Module - abbreviated PCM; this is an integral control unit. So, a defective one should be changed immediately. Check out the top notch PCMs available at Parts Avatar.
11. Automatic Transmission Module - Fix your error code P0516 as soon as possible with a new automatic transmission module. So, what are you thinking? Parts Avatar is just a click away!

Want to know the symptoms of the OBD error code P0516? If yes, then you have landed at just the right place. We have listed here a few common symptoms related to the battery temperature sensor circuit low.

Common symptoms

• The malfunction indicator lamp (MIL) appearing on
• A low charging voltage
• The charger indicator light flashing on

Want to make corrections? Well, you can have a look at some ways through which you can fix the OBD Error code P0516:

• The faulty battery temperature sensor should be replaced/repaired.
• Replacements of the broken or defective electrical wirings and connectors should be made.
• Mend/change the corroded battery.

There is no need to get tensed if your OBD Code is still flashing up as Parts Avatar is always here at your service. You can have a look at our superior quality range of battery temperature sensor, ECMs, car batteries, trail wiring harness, indicator lamp, terminals, indicator light, powertrain control module, lead acid battery, battery connectors, truck batteries, brake control module, wiring harness kit, electronic control module and many more.

Here’s how you should accurately perform the diagnoses of the error code P0516:

• Now that the code has been detected by the OBD-II scanner, the technician should start with a visual inspection of all the wirings and the various other electrical components. After all the damaged, burnt, broken or shorted components are repaired, the code should be cleared from the PCM, and the system should be retested.
• If the code sets back, the technician should test the voltage and the ground signal at the temperature sensor and compare this information with the manufacturer’s specifications. If the data doesn't match, the sensor is unsound and should be replaced. If the data does match, the technician should start with testing the related circuits until the fault is discovered.

Common Mistakes When Diagnosing the P0516 Code

Wishing to combat the error code P0516? Here listed are a few mistakes that need to be avoided to accurately overcome the OBD Error Code P0516-

• A failure in the battery temperature sensor
• A fault or failure in the powertrain control module (PCM)
• Issues with the wirings