Error Code P0496: What It Means & What To Do?

<<See All OBD Codes

The P0496 fault code would indicate that there is some issue with the purge flow in the evaporation system. It would mean that there is an undesirable amount of intake vacuum flow into the EVAP system. If the vacuum in the EVAP system would be higher than the value which has been predetermined, then the error code P0496 would start triggering up.

The fault code P0496 can be defined as EVAP Flow during a Non-Purge Condition.

The fuel system of the vehicle is sealed by the evaporative emission control system so that it can prevent fuel vapours from the fuel tank and fuel system from escaping into the atmosphere. This is very essential as the fuel vapours have a lot of hydrocarbons. Smog is formed by the hydrocarbons when they react with air and sunlight.

What causes this problem with the EVAP Flow During a Non-Purge Condition?

• Failure in the EVAP/fuel pressure sensor
• The electrical connections might turn out to be bad
• Defaults in the purge or vent solenoid/valve
• There can be plugged EVAP canister
• Issue of bad canister purge valve
• Some quirks in the vent solenoid

1. EVAP System - A faulty EVAP System can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Powertrain Control Module - If everything is alright with EVAP System, then there is surely some defect in Powertrain Control Module. Get it replaced before the situation gets worse.
3. Vacuum Hose - P0496 code can display due to some issues in the Vacuum Hose. So, it is very important to replace the Vacuum Hose with us at equitable prices.
4. Engine Control Module - Do you remember when was the last time you got your car Engine Control Module checked up? A defective Engine Control Module can cause a lot of issues like displaying P0496 code.
5. Evap Purge Solenoid - There can be some issues with the Evap Purge Solenoid due to which you may see P0496 code appearing over and over again. Visit us to buy best quality Evap Purge Solenoid online.
6. Evap Pressure Sensor - Are you facing some faults in your Evap Pressure Sensor? Don’t worry and get them replaced or else P0496 code can turn up.
7. Evap Charcoal Canister - Common cause behind this P0496 error code can be some fault in Evap Charcoal Canister. So, it will be a good decision to replace them now.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0496 here:

Common Symptoms

• There can be an appearance of malfunction indicator light
• Engine might be “running rich”, which can cause issues with the catalytic converter and other engine components
• The car driver might face some problems in starting the vehicle

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• You should always utilize the scan tool to determine the code
• Try to reset the code and run the vehicle to see if it returns
• Carefully inspect the fuel cap
• Check the purge solenoid valve, which may need replacement
• The fuel tank pressure sensor should be repaired or replaced as per the requirement

Parts Avatar Canada endeavours to fulfil all the needs of its consumer, that’s why we have a huge collection of top-quality Fuel Cap, Cap Auto, Locking Gas Cap, Purge Control Valve, Body Control Module and many more at equitable prices. We won’t let you down in any way.

Here are some steps which you should follow in order to diagnose this fault code:

When a mechanic has to diagnose a vehicle, he or she will utilize an OBD-II scanner connected to the vehicle’s computer

The computer will store any issues with the vehicle in trouble codes. When they see the P0496 code, they know that the vehicle potentially has a problem with the EVAP flow during non-purge conditions

To make sure that the code is accurate and was not triggered by mistake, they will then reset the code and run the vehicle. If the code comes back, they know that it has an issue and should be fixed properly

Common Mistakes When Diagnosing The P0496 Code

• Most of the time people believe that the issue is within the evaporative emission control system components and start replacing it, when the actual issue is the leakage in the vacuum
• There can be some cases where it might be as simple as a fuel cap that is not tightened properly. It is important to check the smaller and simpler potential solutions first and then work your way up to the larger potential replacements and as well as repairing