P0470 - OBD Trouble Code

<<See All OBD Codes

The OBD Error Code P0470 also determined as Exhaust Pressure Sensor Malfunction, indicates that the signal being provided by the exhaust pressure sensor isn’t matching the ambient air pressure or the manifold pressure. The OBD Error Code P0470 also shares similarities with the OBD Error Code P0471. The only differentiation between the two codes lies in the duration of the persistence of the code, that means how long the problem has lasted for the electrical/mechanical problem the vehicle is having.

This generic trouble code is applicable for all the vehicles with turbocharged engines having an exhaust pressure sensor (EP). The sensor serves its purpose just exactly how its name implies - it measures the exhaust back pressure. Further, this information is transferred to the vehicle’s computer, powertrain control module (PCM). The exhaust back pressure helps the PCM define the control of an emissions device known as the exhaust gas recirculation valve (EGR). In a number of cases, this information is also used in input for turbocharger control.

What causes this problem with the Exhaust Pressure Sensor Malfunction?

• A default in the Exhaust Back Pressure Sensor.
• Shortened or completely open Exhaust Back Pressure sensor harness.
• There is a faulty electrical connection with the exhaust back pressure sensor circuit.
• The tube that connects the pressure sensor to the exhaust manifold is blocked.
• The Powertrain Control Module (PCM) might have failed (extremely unlikely).

1. Exhaust Pressure Sensor - Facing the error code P0470? A damaged or an inferior quality Exhaust Pressure Sensor can be problematic to fix this OBD Error Code P0470. Parts Avatar offers an exquisite range of Exhaust Pressure Sensors at the most affordable prices for its customers.
2. Ambient Air Pressure Sensor - The Ambient Air Pressure Sensor is one of the essentials required to overcome this issue of the OBD Error code P0470. Necessary changes should be made immediately.
3. Manifold Absolute Pressure Sensor - Common causes behind the occurrence of the error code P0470 could also be due to faults in the manifold pressure sensor. So, it’s always a good decision to get it changed to avoid facing issues.
4. Exhaust Manifold - The Exhaust Manifold plays the dominant role in a car or truck’s exhaust system. So, a faulty one should instantly be replaced from the premium one’s available at Parts Avatar to avoid the OBD Error Code of P0470.
5. Exhaust Connectors - Get your connectors fixed right away from Parts Avatar to further avoid any issues related to the OBD Error code P0470, available at economical prices.
6. Turbochargers - A turbine-driven forced induction device that increases an internal combustion Engine’s efficiency and power is fundamentally important to avoid the issues of the OBD Error Code P0470. Defective ones should be changed or replaced as soon as possible.
7. Exhaust Harness - Facing problems with the Error Code P0470? Well, get that fixed easily at Parts Avatar online. A shortened or a completely open harness should be changed immediately to further avoid any complications.
8. Powertrain Control Module - abbreviated PCM; this crucial control unit if defective or damaged should be changed as soon as possible.
9. Exhaust Gas Recirculation Valve - The EGR valve allows and controls the specific amount of exhaust back into the intake manifold. So, a defective or a blocked one should instantly be changed with a new one. 

We at Parts Avatar Canada care for our customers, and that’s why we will help you diagnose P0470 code by listing out some major symptoms. They are mentioned below as follows:

Common Symptoms

• In the presence of the Code the Check Engine Light is likely to illuminate. Also, Lack of power is most likely to be felt.
• If in case Manual regeneration becomes impossible, eventually, it can lead to the problem turning into a crank-no start too.

After understanding the symptoms and few common causes behind the OBD error code, we are here to help you out in understanding the ways and means to correct the issue. To solve any issue, you need to follow certain steps, and to solve OBD error code P0470, you will need to undergo the following replacements:

• One of the major steps to be taken include the replacement of the damaged the back-pressure sensor.
• This major step becomes enough to make the code disappear.
• If not, the sensor and the circuits associated with it will need proper try-outs to make sure of the fact that the former doesn't end up affecting the latter.
• To ensure the proper working, the power supply for the sensor also needs to be checked properly.
• The power supply to the exhaust pressure sensor should also be measured.

However, if you face, we have a stocked wide range of the best priced Exhaust Pressure Sensors, Ambient Air Pressure, Manifold Pressure, Exhaust Manifold, Connectors, Turbochargers, Harness, Powertrain control module, Exhaust Gas Recirculation Valve and many more to help you out fixing your car.

Here are some steps which you need to follow in order to diagnose this P0470 fault code:

• As we are already known how often it is involved with the Error OBD Code P0470, first and foremost the mechanic will check the exhaust back pressure sensor while investigating the underlying issue.
• After that the tube that connects the exhaust manifold to the exhaust pressure sensor needs to be disconnected to further check by running air through it. If that appears to be impossible, a wire can be used to dislodge the blockage.
• Then the mechanic will check the wiring involved for the signs that it has been compromised. also, similarly the connectors need to be checked.
• The harness connecting the exhaust pressure sensor should be disconnected so that the power supply circuit can be tested to ensure its proper functioning.
• If no other problem is detected, then the issue is most likely that the exhaust pressure sensor is simply creating the fault.

Common mistakes when Diagnosing the P0470 Code

The major problem underlies in just not giving the required attention to the back-pressure sensor while diagnosing the problem. More often, that where one ends up lacking while finding the problem. So that's where one should start checking on before moving to anything else and avoid wasting time in end ultimately returning to the sensor, or even worse, by completely misdiagnosing the problem.