P0422 OBD Error Code: Problem & Solutions

<<See All OBD Codes

Do you know when the efficiency of your system will fall below threshold? What is P0422 code? What are its symptoms? The P0422 error code is a common type of OBD –II error code. The P0422 error code will suggest that the efficiency of the catalyst is less than the usual threshold in the bank of first engine, it is generally the place which lines the number one cylinder.

The capacity of the catalyst is defined by the powertrain control module (PCM), as it uses the information of the temperature as well as the exhaust from both the front (upstream) and rear (downstream) oxygen sensor to decide on the efficiency. If the PCM determines the readings as similar from both the sensors, then the capacity of the catalyst is likely to be less than the threshold, and the system will trigger the P0422 code.

What causes this problem with the Main Catalyst Efficiency Below Threshold (Bank 1)?

• Fault in the oxygen sensor
• Damaged coolant temperature sensor
• Defective manifold air pressure sensor
• Mass air flow sensor that may be defective
• Engine oil that is polluted
• Front engine leak from the catalytic converter
• Failing of the engine
• Free or broken connections and wires

1. Fuel pressure regulator - A broken or damaged fuel pressure regulator can give rise to the error code P0422. Fix them if you find any damages.
2. Air flow sensor - Is there a fault or leak in your air flow sensor? Replace them with the right replacement part from Parts Avatar.
3. Oxygen sensor - Did you find any faults with your front and rear oxygen sensor? So why wait? Replace them immediately with a new one.
4. Coolant temperature sensor - A broken or damaged coolant temperature sensor has to be changed as soon as the fault is identified.
5. Connectors - Are your connectors broken, damaged or burnt? It’s never too late to replace them with the right component.

Next important thing you need to know about are the common symptoms for this OBD error code P0422 with your fuel volume control.

Common Symptoms

• Increase in emission in the tailpipe
• A brightened MIL (Malfunction Indicator Lamp)
• The service engine sends a sooner warning light

We have listed out some ways which would help you to correct the occurrence of OBD Code P0422.They are mentioned here as follows:

• Replacing the catalytic converter
• Replacing the damaged oxygen sensors
• Replacing with new wires for the electrical connectors
• Fixing the leaks of the engine
• Fixing the mass air flow sensor
• Replacing the damaged manifold air pressure sensor
• Changing the fuel pressure regulator
• Substituting the coolant temperature sensor

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of Oxygen Sensor, Connectors, Fuel Injector, Catalytic Converter and many more. Now all your problems would vanish within no time.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

•  
• The mechanic will use an OBD –II scanner in order diagnose the trouble codes of P0422. In order to access the P0422 code the trained mechanic will use the trouble code scanner to search for any other trouble codes. After inspecting these elements, trouble codes are reset and the mechanic will start the vehicle. If you don’t see the code, then it indicates that it was falsely prompted and there is no problem with the engine.
• If you see any additional code when you check for the P0422 and the code returns, the mechanic will check for broken wires and connections close to the catalytic converter. If there are any broken or free connections, they have to be immediately replaced and, reset the codes to see if the problem is solved. After the technician fixes the broken wires and connectors, he will check for the catalytic converter and visually inspect for leaky areas in the exhaust system.
• If you notice any issue with the catalytic converter, then the mechanic will check every areas of the vehicle and find the reason for the damage of the catalytic converter as they can be the problem for this issue anywhere in the engine.

Common Mistakes When Diagnosing the P0422 Code

• When you don’t follow the diagnosis protocol properly for OBD –II trouble code, then this common mistake will prevail in the P0422. If you fail to follow these protocols, then you have to replace the catalytic converter without knowing the cause of this issue which causes the failing of the converter. At times, you may even fail to address other trouble codes.
• One of the common mistakes is to replace the oxygen sensors by mistake. The oxygen sensor cannot be the primary problem that triggers the P0422 code. Before you replace the oxygen sensors carefully check them and never assume that the P0422 code is because of the sole reason of oxygen sensor.