Feedback

Guide To P0363 OBD Error Code Solutions

OBD Code P0363 - Misfire Detected - Fueling Disabled

<<See All OBD Codes

If the P0363 trouble code has been stored by the PCM, then it would indicate that there has been a misfire in the cylinder and the PCM has disabled the supply of fuel to the malfunctioning cylinder.


This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another.


This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

Learn More About OBD Error Code P0363

If the engine control module would detect that one or more cylinders are not properly contributing in the functioning of the car engine properly, then it would be setting up the P0363 fault code.

The trouble code P0363 can be defined as Misfire Detected - Fueling Disabled.


What causes this problem with the Misfire Detected - Fueling Disabled?


  • EGR system might not be functioning well
  • Quirks in the fuel injectors
  • Faults in the ignition coil or coil pack
  • There can be moisture or oil in spark plug galley
  • The fuel pressure might be insufficient
  • Leakage in the engine vacuum
  • The catalytic converter might be clogged
  • Cracked or torn spark plug wire or spark plug boot

Replace/Repair These Parts To Fix OBD Code P0363

  1. Engine Wiring Harness - A faulty Engine Wiring Harness can be troublesome. You can always rely on us as we have best auto parts for our customers.
  2. Powertrain Control Module - If everything is alright with Engine Wiring Connectors, then there is surely some defect in Powertrain Control Module. Get it replaced before the situation gets worse.
  3. Engine Control Module - P0363 code can display due to some faults in the Engine Control Module. So it is very important to replace the Engine Control Module with us at equitable prices.
  4. Engine Wiring Connectors - Do you remember when was the last time you got your car Engine Wiring Connectors checked up? A defected Engine Wiring Connectors can cause a lot of issues like displaying P0363 code.
  5. Fuel Pump - Poor Fuel Pump can cause a lot of difficulties, so why not get it replaced at time?
  6. Battery Cable Replacement Terminal - Are there some faults in your Battery Cable Replacement Terminal? Don’t waste time and get them replaced or else P0363 code can turn up.
  7. Ignition Coil - Everything is fine with Ignition Coil and still P0363 code triggering? Then you must get your Ignition Coil checked.

Symptoms Of OBD Error Code P0363

There could be countless symptoms which that would accompany with this fault code. Willing to know some common symptoms of OBD Trouble Code P0363? Your wish is our demand. Have a look at them below:


Common Symptoms


  • There can be rough or choppy engine operation
  • Decrease in the engine performance
  • Other misfire related codes might be stored
  • The MIL can start illuminating

How To Correct P0363 Misfire Detected - Fueling Disabled

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:


First of all, tune-ups on ignition system components should be carefully performed, including checking for faulty spark plugs, boots, ignition coils, distributor caps, and fuel filters


Moving coils, spark plugs, and other components to a cylinder that is operating properly, in order to assess which parts might be defective


Inspect the oxygen sensor data to determine if there is a vacuum leak


A broken, disconnected, or cracked vacuum hose should be repaired properly


Inspecting and unclogging the catalytic converter

Repair or replace any defective fuel injectors


Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of spark plug wires, Diesel Injection, Ac Delco Spark Plugs and a lot more. We are sure that now all your issues would be resolved.

Easy Diagnosis Of Engine Error OBD Code P0363

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0363 code to be stored:


You must begin all diagnostic procedures with a thorough visual inspection of electrical components, such as wiring and connectors


If there are any loose, corroded, faulty, open, or shorted circuits then they should be replaced or repaired as per the requirement


Then you should clear the codes and the vehicle should be given a road test to see if the code is stored again


Recreating the failure and storage of the code is a good way to be sure of the exact issue. If the P0363 code returns once again, then the mechanic should move on to other possible repairs


Common Mistakes When Diagnosing The P0363 Code


  • The P0363 code generally relates directly to the ignition system components. This is the reason why these parts are frequently the first things to be repaired or replaced when addressing the P0363 code.
  • You must keep this in mind that there are several other factors that can play a part in the misfire of a cylinder, so any repair technician should be sure to give the system a thorough diagnosis