Error Code P02C6: What It Means & What To Do?

<<See All OBD Codes

The OBD code P02C6 can be defined as cylinder 12 - fuel trim at max limit. It is a generic powertrain diagnostic fault code which would apply to all gasoline the OBD-II vehicles. The exact repairing steps can always vary depending upon the year, make, model as well as the configuration of the powertrain. It can include but is not limited to the vehicles like the land rover, Mazda, jaguar, ford, Nissan and many more.

It is the powertrain control module which would monitor the fuel pressure at the fuel rail through the fuel pressure sensor. This code would be then set by the powertrain control module when the fuel pressure is out of the factory specifications.

The engine control module would use a number of sensors to determine the required amount of fuel needed to keep the engine running efficiently. If the desired balance is not achieved by the powertrain control module between the air and the fuel, then it would set the P02C6 fault code.

What causes this problem with the Cylinder 12 - Fuel Trim at Max Limit?

• There can be faulty fuel injector 12
• The issue of clogged or leaking fuel injector 12
• The harness of fuel injector 12 might be opened or shorted
• Bad electrical connection of fuel injector 12

1. Powertrain Control Module - Common cause behind this P02C6 error code can be some fault in Powertrain Control Module. So, it will be a good decision to replace them now.
2. Fuel Pressure Sensor - Powertrain Control Module is perfectly fine but still but having that trouble code P02C6 flashing? In such a situation your Fuel Pressure Sensor might be faulty. Why don’t you think of getting that replaced?
3. PCV Valve - The P02C6 code can also arise due to some issues in PCV Valve. So, it is advised to replace them as soon as possible.
4. Intake Manifold Actuator - P02C6 code does not really end up spoiling your Fuel Pressure Sensor, but it might also accompany few Intake Manifold Actuator issues. We have best Intake Manifold with us.
5. Fuel Injector - Are you facing OBD Error Code P02C6? Don’t worry as you can fix this issue with new Fuel Injector. We care for our customers, that’s why we have Fuel Injector for every make and model.
6. Spark Plug - A broken Spark Plug can cause a lot of issues. It would be nice if you get it replaced on time.

We care for our customers and that’s why we can totally understand your problem. That’s the reason why we have listed out some major symptoms behind the flashing up of OBD Code P02C6. They are mentioned here as follows:

Common Symptoms

• The engine performance might start decreasing
• The fuel efficiency can start reducing
• There can be delayed engine start up
• The presence of stored rich exhaust codes
• Misfire codes can also get stored

Looking out for some ways with the help of which you can correct this fault code? Then have a look below:

• Fuel Injector should be replaced
• If you find out that the spark plug is faulty, then it should be replaced

Parts Avatar Canada endeavors to fulfill all the needs of its consumer, that’s why we have a huge collection of top quality MAP sensor, 02 sensor, spark plug, Crankshaft sensor, Injection pump, Air fuel ratio sensor and many more at equitable prices. We won’t let you down in any way.

First of all, you must begin your diagnosis with a general inspection of the engine intake manifold area. Your main focus should be on vacuum leaks. Try to listen for the sound (hissing) of a vacuum leak. Carefully check all hoses and plastic lines for signs of cracking or collapse. The PCV lines are a common source of vacuum leaks. Also, check the edges of the intake for signs of gasket failure. Secondly, you should examine the fuel injector for signs of fuel leakage. If you find out that the injector is wet with fuel, then it might have failed.

If there are no obvious mechanical issues discovered in the engine bay, then there are several tools that will be required to continue your diagnosis:

• A diagnostic scanner
• A digital volt/ohmmeter (DVOM)
• A fuel pressure gauge with adapters
• A reliable vehicle information source

Common Mistakes When Diagnosing The P02C6 Code

• Fuel injector might start failing
• Some faults in the Powertrain Control Module
• There can be some issues in the wiring