P0286 - OBD Trouble Code

<<See All OBD Codes

When the P0286 code gets stored, the manufacturer because the vehicle’s ECM has received a voltage reading from the fuel injector circuit that isn’t within the parameters that designate it. The reading could have also come from the fuel injector in cylinder nine.

The P0286 code is typically the responsibility of wildlife. The heat coming off your engine after you’ve parked and actually climb inside to rest on top of it will attract squirrels and other creatures. As soon they do, it’s frequently just a moment of time before they go ahead to chew through some of your vehicle’s electrical wiring.

What causes this problem with the Cylinder 9 Injector Circuit High?

• Insecure or damaged connector faces or wiring
• Clogged fuel injectors
• Defective fuel injectors
• Defective fuel injector driver situated in the PCM

1. Powertrain Control Module - A defective PCM could fail in starting your car or begin stalling when running. You will begin to notice that emissions will have shortened, a sign of the failure to control the emissions system, so with a PCM not running correctly, you need to replace it as soon as possible.
2. Engine Control Module - A failed ECM could mean that your car will delay in starting or may go into stalling mode when running. A shortage of emissions that will occur if controlling the emissions system has failed, so if your ECM is not functioning correctly, you need to replace it immediately.
3. Fuel Injectors - When the engine is misfiring, it rapidly overheats and pre-ignites the mixture of fuel. A corroded fuel injector not only produces issues while driving, but the outcomes will persist even when the engine runs ineffectively on energy. Rather than an engine running very poorly on power, it will become rough and irregular when the fuel storage is unexpected.
4. Electrical Connector - Fuel injector connectors are more vulnerable to aging, wear and tear. The fuel injectors situated on the engine are exposed to intense heat, vibration, and chemical emissions. During this time, such results will deteriorate the connectors’ nylon body to an extent that they will eventually crumble. It’s a good idea to make sure you find the rightful fuel injector connector for your vehicle.
5. Fuse - The fuel pump relay might suffer issues during when the car is running, as it cuts off power to the fuel pump, completely stalling the engine. The fuel pump will be left unpowered if the fuel pump’s relay starts to fail. Seek out a professional technician to inspect your vehicle to determine if the component should be replaced.

If a P0286 code has been stored, you will notice the Check Engine light has turned on. However, a more evident indication is if your engine is misfiring. That’s not in any case an uncommon factor. For the engine to begin running horse is not a rare thing, as it results in a below average fuel economy. Even when your car is sitting still, you may feel vibrations coming from the transmission or even feel it vibrating. Trying to speed up will most likely be jerky too.

Your mechanic will have to do one of the following to fix the P0286 code:

• Restore the corroded wiring or other electrical components
• Restore corroded fuel injectors
• Cleaning out clogged fuel injectors
• Repair blown fuses
• Replacing a faulty PCM, in any rare case

Your mechanic will use a code reader to begin their assessment. A node lamp and your vehicle’s service manual will come in handy tool for figuring out what the appropriate voltage is supposed to be. They will also inspect electrical components, connectors and wires. Fuses and the fuse panel will be inspected as well. A continuity and resistance test may be necessary as well.

Common Mistakes When Diagnosing The P0286 Code

Open or shorted circuits often don’t get addressed which makes an accurate diagnosis and correct repairs impossible. Usually, if a mechanic misses that the fuel injection system has open or shorted circuits, they’ll go on to assume that the PCM isn’t working correctly and replace it – an expensive measure if not necessary.

Faulty fuel injectors can cause the same type of misdiagnosis and unfortunately response.