Guide To P008E OBD Error Code Solutions

<<See All OBD Codes

The major symptom of this code is that, decrease in engine performance, acceleration and idle surging and check engine light illumination. The noise coming from the fuel cooler pump is what causes the Fuel Cooler Pump Control Circuit High come on so that the vehicle can be repaired as soon as possible.

It is always a good idea to learn something more. That’s why we are here to tell you more about P008E trouble code. When a malfunction within the fuel cooler pump circuit is detected by the power control module, then this fault code would start triggering. Fuel cooler pumps apply to vehicles that run on diesel fuel. The diesel is cooled by the fuel cooler pump to prevent excessive wear on fuel as well as engine components.

What causes this problem with the Fuel Cooler Pump Control Circuit High?

• Defects in the fuel cooler pump
• The connector may get corroded or damaged
• Faults in the wiring
• Issues with the Power Control Module

1. Fuel Cooler Pump - Sometimes P008E error code can come because some defects in the Fuel Cooler Pump. So, it would be a nice decision to replace it now.
2. Fuel Sender Connector - P008E code does not really end up spoiling your timing belt, but it might also accompany few fuel sender connector issues. We have best Connector related parts with us
3. Engine Control Module - The P008E code can also arise due to some issues in Engine Control Module. So, it is advised to replace them as soon as possible.
4. Powertrain Control Module - P008E code does not really end up spoiling your timing belt, but it might also accompany few powertrain control module issues. We have best powertrain related parts with us.
5. Diagnostic Tool - These tools help to identify and diagnose problem related to error code P008E. Visit us today to buy quality diagnostic tools.
6. Service Tools & Equipment - Check out the necessary service tools and equipment you might require while solving and detecting the OBD errors for your car. These tools will do the correct analysis for you and will always come handy.

Common Symptoms

• Decrease in the overall engine performance
• Acceleration and idle surging
• An illumination in the check engine light
• The fuel consumption may start increasing
• Noise can start coming from the fuel cooler pump

Here is some way with which you can correct the P008E error code. Have a look at them:

• The fuel cooler pump should be replaced
• The corrosion which is present on the connectors should be
• The damaged wiring should be properly repaired or replaced
• There can be some issues which the powertrain control module. The best option would be to replace it 

First and the foremost thing which you have to do is to find all the components which are related with the Fuel Cooler Pump Control Circuit. It includes the fuel cooler pump, the fuel cooler, the fuel cooler reservoir and the PCM on a simplex system. Now once you have located all the components by inspecting visually, then you must check the related wiring as well as connectors for damage such as scraping, rubbing, bare wires or spots of burn. There can be some signs of the coolant leaks, level and condition of the fluid should also be involved in this process.

Advanced Steps

The advanced steps are vehicle specific and require suitable equipment’s to perform accurately. A digital multimeter as well as specific technical references of the vehicle would be needed to carry out these procedures. The voltage requirements may differ as per the specific year, model and the engine of the vehicle. You will also be able to check the technical service bulletins for your vehicle with its help, as there can be some known issue and fix which would save lots of your money as well as your precious time during diagnosis.

Common Mistakes When Diagnosing the P008E Code

The technicians who are inexperienced may start assuming that the engine needs a new timing chain or belt based upon this code. There are chances that the owner of the vehicle could spend several hundreds of dollars on the problem which would still not get solved in the absence of performing a proper diagnostic procedure. You can solve this issue with a simple computer learn procedure or reprogramming. Make sure that you don’t spend hundreds of dollars to only fix their car issues which could be easily fixed in less than an hour.