P008B - OBD Trouble Code

<<See All OBD Codes

The first indication is the car fuel may get dirty almost immediately it senses the OBD P008B code error. This directly impacts the fuel system performance as it struggles with power and acceleration as well as the fuel may become unstable.

When the fuel pressure is too high is detected by the engine control module, then the error code P008B would be set in by the PCM. This code would indicate that the fuel pressure is below the specification for the supply needed for the vehicle to operate.

What causes this problem with the Low Pressure Fuel System Pressure?

• The car fuel may get dirty
• Issues with the fuel line or filter problem
• The fuel may become unstable
• Defects in the fuel injector
• Weak low pressure in the fuel pump
• Sludgy fuel like old, thick or contaminated

1. Fuel Injector - Are you facing OBD Error Code P008B? Don’t worry as you can fix this issue with new Fuel Injector. We care for our customers, that’s why we have Fuel Injector for every make and model.
2. Fuel Line Or Filter - There can be some defects in the Fuel Line Or Filter due to which P008B code may come on again and again. Make sure to replace it or else you may have to face some major issues.
3. Low Pressure Fuel Pump - Low Pressure Fuel Pump is a very important car part. One must take care of it and you can always buy a new one from us at economical prices.
4. Diagnostic Tool - These tools help to identify and diagnose problem related to error code P008B. Visit us today to buy quality diagnostic tools.
5. Service Tools & Equipment - Check out the necessary service tools and equipment you might require while solving and detecting the OBD errors for your car. These tools will do the correct analysis for you and will always come handy.

Here are some common symptoms of P008B diagnostic code:

Common Symptoms

• Decrease in the power
• Limited output
• Throttle response by the abnormal
• Decrease or increase in the fuel economy
• Increase in the overall emissions
• The car engine may start
• Smoke may start emitting from the engine while starting

Learn the ways with which you can correct this trouble code:

An advanced scan tool is used to properly diagnose P008B fault code which is capable of factory sensor readings as well as codes to start. A technician which is well qualified would be able to read the data from the scan tool and would tell that exactly when and where the issue actually occurred or if the problem is still occurring. They can always clear the code from the ECM and take a test drive of the vehicle. This can be done while monitoring the scan tool data to see if the fault returns or if it is intermittent.

If you find out that the fault is irregular, then it would be a good idea to visually inspect the wiring as it can produce more results. Or else the vehicle will have to be driven until the problem becomes more tenacious. Now if you find out that the fault has returned back immediately, then your issue would be narrowed down with the help of scan tool as well as information from the professional resources. Or else you may require a digital voltage scope which would help in monitoring the sensor signals. The signals which are coming would indicate what the ECM is actually seeing and if they are correct or not. If you want to verify the timing, then the front timing cover of the engine should be removed. Now as per the results of the testing, then the clearing of the code, road testing while monitoring the data, then later diagnosis may be required. Some tools may be required for diagnosis, they are mentioned here below as follows:

• It is important to read the values of the ECM and that’s why an advanced scan tool would be required
• A digital voltage scope with attachments
• To access the sensors and timing components, you may need some basic hand tools

Don’t get tensed if you are still facing any of these issues. We offer a good range of Fuel Injector, Fuel Filter, Fuel Line and a lot more. We are sure that now all your issues would be resolved.

• Keep this thing in mind that there should be good amount of fuel filled up in the vehicle
• The fuel filter should be replaced
• The defective fuel line can always be replaced with a new one
• Replace the car fuel injector(s)
• You must replace the fuel pump 

Common Mistakes When Diagnosing The P008B Code

The technicians who are inexperienced may start assuming that the engine needs a new timing chain or belt based upon this code. There are chances that the owner of the vehicle could spend several hundreds of dollars on the problem which would still not get solved in the absence of performing a proper diagnostic procedure. You can solve this issue with a simple computer learn procedure or reprogramming. Make sure that you don’t spend hundreds of dollars to only fix their car issues which could be easily fixed in less than an hour.

P008A - Low Pressure Fuel System Pressure - Too Low