Guide To P006E OBD Error Code Solutions

<<See All OBD Codes

Do you want to know the reason why P006E trouble code is triggering up again and again? The main reasons for this are that there is some sort of Internal Mechanical Problem with The Turbocharger/Supercharger, defective turbocharger or supercharger and there can also be some issues with the boost control module. Take care of all these car parts or else your car may have to face some major issues.

Parts Avatar Canada is here to tell you more about OBD Code P006E. The energy which is generated from the engine is used by the turbochargers, superchargers and forced induction systems. This is done so that the amount of air which is to be introduced to the combustion chamber can be increased.

What causes this problem with the Turbo/Supercharger Boost Control A Voltage Low?

• There can be some Internal Mechanical Problem with The Turbocharger/Supercharger
• Leakage in the Exhaust
• Defective Powertrain Control Module
• The boost control solenoid can be defective (For example- lever stuck, broken, bent, etc.)
• High Resistance caused due to corrosion
• You can start facing some major wiring issues like frayed, open, short to power, short to ground, etc.)
• Some sort of internal issue with the Engine Control Module
• Defects in the boost control module
• Boost Pressure/ Turbocharger Position Sensor Harness may be opened or shorted
• Bad electrical connection in the Boost Pressure/ Turbocharger Position Sensor Circuit

1. Engine Control Module - Issues with Engine Control Module can be irritating and its best to replace them. We have a huge variety of Engine Control Module available for our dear customers.
2. Boost Control Solenoid - Is your Boost Control Solenoid damaged or broken? Don’t worry as we have solutions for all your problems.
3. Powertrain Control Module - Defective car Powertrain Control Module can be a major reason why P006E code depicts. So, make sure to replace it online so that you don’t have to face any further issues.
4. Boost Pressure Position Sensor Harness - Everything is okay with the Powertrain Control Module and still OBD code P006E triggering? Then there must be some defects in Boost Pressure Position Sensor Harness. Replace them as soon as possible.
5. Turbocharger Position Sensor Harness - Damaged Turbocharger Position Sensor Harness can give rise to P006E OBD code. Buy it online from us at equitable prices.
6. Diagnostic Tools - Willing to purchase few diagnostic tools to get your car problems pointed out easily. Our diagnostic tools collection will come handy to do so, so why not have a look?
7. Exhaust System Parts - Damaged Exhaust System Parts can give rise to P006E OBD code. Buy them online from us at equitable prices.

Willing to know some common symptoms of OBD Trouble Code P006E? Your wish is our demand. Have a look at them below:

Common Symptoms

• Check Engine Light may start illuminating
• Delay Upon Acceleration
• Vehicle In “Limp Mode” running on reduced power to protect the engine
• Reduced fuel mileage
• Engine light can start appearing
• Power Levels may become low, erratic and unusual
• Overall bad drivability
• Reduction in the throttle response
• Problems while driving up hills
• Vehicle may enter "Limp" Mode
• Intermittent driveability symptoms may start appearing

Learn the ways with which you can correct this trouble code:

• The boost control solenoid should be replaced
• Bad wiring of the vehicle boost control circuit should be repaired or replaced
• The defective turbocharger/supercharger should be replaced
• If there is any exhaust leak, then it should be fixed
• The Powertrain Control Module should be replaced if damaged

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of Powertrain Control Module, Supercharger, Automatic Transmission Module and a lot more. We are sure that now all your issues would be resolved.

You must keep this thing in mind that dangerous amount of heat is generated by the forced induction systems and it can burn your skin if it is not protected properly or the car engine is cool. That’s why you must locate the boost control solenoid visually. These are mounted directly to the charger itself but not all times. Once it is fully located, then make sure its mechanical functionality is up to par. It would be a good sign if you are able to move the lever from the solenoid to the charger housing. But it depends from system to system as you might not be able to do this in some systems. You will be surprised to know that these solenoids possess adjustable levers which aids in finding the "sweet" spot.

P006F - Turbocharger/Supercharger Boost Control "A" Supply Voltage Circuit High