Guide To P003C OBD Error Code Solutions
OBD Code P003C - "A" Camshaft Profile Control Performance/Stuck Off Bank 1
<<See
All OBD Codes
Are you troubled by your vehicle’s poor drivability and low power or
altered power bands? Did you consider getting it checked? Well the chances are
that your vehicle is set to OBD Error Code P003C that indicates ‘A’ Camshaft
Profile Control Performance Off Bank 1. Now, to understand what exactly this
issues is you will have dig deeper into this article.
Learn More About OBD Error Code P003C
Are you aware of what
this problem wants you to do? In case you are not, we have taken the initiative
to enlighten you for the same. Your vehicle’s ECM or Engine Control Module will
illuminate check engine light with error code P003C when it detects some errors
within the camshaft profile control circuit. P003C is set when there is a
performance problem or stuck off condition within the bank 1 circuit.
Wondering what causes
this problem with your vehicle? Let's have a deeper look at the causes of P003C
What causes this problem
with the Camshaft Profile Control Circuit?
- Your lack of oil
maintenance can be one of the common causes. You can’t ignore the fact that how
important is oil maintenance for your car’s proper functioning.
- There are chances that
you have used the incorrect oil that becomes one of the potential causes.
- Oil can also be
contaminated becoming another potential cause.
- Your vehicle’s valve if
stuck, will become another common cause.
- Wirings are essential
for the functioning of a vehicle and if they are broken or damaged, they can
cause this issue.
- Another potential cause could be an electrical short, either internal or mechanical.
- Your vehicle’s Engine
Control Module issues can become one of the causes too.
Replace/Repair These Parts To Fix OBD Code P003C
- Fuel solenoid
- if you need fuel solenoid to
correct your obd error code P003C then you can simply visit PartsAvatar Canada
and get your hands on the best selection parts available.
- Camshaft
- We at PartsAvatar Canada have in
stock the best and high end Camshaft and parts to help you solve every problem.
- Turbocharger or
supercharger - replacing your turbocharger can also help you to
solve your problem.
- Ecm - If you really want your ECM to work in best possible
condition to allow the smooth functioning of the engine, you will need to
replace the damaged ECM with a new one.
- Fuel valve
- OBD P003C code might damage your
vehicle’s fuel valve. Don’t worry! You can find budget friendly parts with us
at PartsAvatar.
- Wiring
- When OBD code P003C flashes on your instrument panel,
chances are that there is a problem not only with your Camshaft position
control circuit but also with the auto wirings. Replace these damaged wirings
with brand new ones only at Parts Avatar Canada.
- Throttle Body
- P003C code might be accompanied by some throttle body
issues. You might require new throttle bodies and parts to get this problem
solved.
- Engine Oil
- Considering that P003C error can
be caused if you use incorrect or contaminated oil, changing it to new one
might solve your problem.
- Diagnostic Tools
- In order to be that DIY guy, you need to few diagnostic
tools to get your car problems pointed out easily. Our diagnostic tools
collection will come handy to do so, so why not have a look?
- Powertrain Control Module - You can find powertrain
control module (PCM) with us to correct your P003C obd error code.
Symptoms Of OBD Error Code P003C
After knowing all the causes for the
problem, let's throw some light on its few common symptoms too. We are sure
they will help you to detect the problem at the early stages.
Common Symptoms
- Low power is one of the common symptom
- You might experience that your vehicle
is showing poor drivability symptoms
- Fuel economy might also be
substantially decreased
- You might experience abnormal throttle
response
- There might be a general reduction in
efficiency
- There might be altered power bands
How To Correct P003C "A" Camshaft Profile Control Performance/Stuck Off Bank 1
In order to correct
this OBD Code P003B you will need to undergo the following steps and might need
the following parts.
- In order to correct this,
issue you will need to make sure that there is enough clean oil in the engine
- You can’t afford to
use incorrect engine oil; therefore, you have to make sure the engine oil has
the proper oil specifications
- You will need to
replace the VVT also known as Variable Valve Timing actuator
- Also you will need
to replace camshaft variable timing solenoid
- You will also need
to replace the faulty wirings to the camshaft and crankshaft sensors.
- Also, replace PCM
(Powertrain Control Module)
- Replacing the stuck valve is an another important step.
In case the problem persists and you
need parts to fix it you can browse through our website to find your trophy
parts. We have stocked a wide range of best priced parts to help you out in
fixing your car.
Easy Diagnosis Of Engine Error OBD Code P003C
Now, in order to
correct the problem, it is extremely essential to diagnose it efficiently and
appropriately. While doing so you might commit few mistakes, to prevent you
from doing so we have listed out few steps for you to keep in mind.
- Verify the general
integrity and cleanliness of the oil that your engine uses. Keep a keen eye on
your oil schedule as week. In short you need to take a proper car of your
engine oil - its integrity, specification, contamination level, thickness and
so on. We recommend you to always use manufacturers recommended oil viscosity.
A too thick or too thin oil can cause problems.
- Next you need to
check and inspect your wiring system to camshaft profile control circuit or
crankshaft sensors.
When diagnosing the
P003C OBD-II trouble code, the most common mistakes made by technicians or that
you are most likely to make are:
- Not verifying the
P003C code
- Failing to perform a
visual inspection of the turbocharger or supercharger
- Forgetting to clear
the P003C code after making repairs