P002A - OBD Trouble Code
OBD Code P002A - B Camshaft Profile Control Circuit Open Bank 1
A sudden drop in the fuel efficiency and the engine performance may be an indication of problem with the camshaft, thus indicating OBD Code P002A Error where “B” is an indicative of problem with Camshaft Profile Circuit Control.
Therefore, OBD Code P002A - “B” error refers to the
timing discrepancy between the crankshaft and exhaust camshaft.
Learn More About OBD Error Code P002A
OBD-II Code
Decreased engine performance is defined as a "B" Camshaft Profile Control
Circuit/Open.
The engine
control module (PCM) uses a signal from the camshaft position sensor to
determine the proper time to fire the fuel injector and ignite the spark plug.
The PCM compares this signal to the signal from the crankshaft to determine if
the engine is timed properly. Newer vehicles use a variable timing system to
adjust the timing of the camshaft in relation to the crankshaft to increase
fuel efficiency and performance. If the Camshaft is not in the proper position
relative to the crankshaft, the PCM will set code P002A.
What causes this problem with the Camshaft Profile Circuit Control?
- Reduced engine
oil levels
- Use of
incorrect/contaminated engine oil
- Ill-timed Car
Engine
- Damaged/stretched
timing chain/belt
- Faulty
Camshaft/Crankshaft Sensor
- Faulty
wiring/harness to the camshaft and/or crankshaft sensors
- Problem with the
PCM/ECM (Powertrain Control Module)
- Stuck/Damaged Valve
Replace/Repair These Parts To Fix OBD Code P002A
- Camshaft &
Parts - The main indicative of OBD Code P002A is a faulty
exhaust camshaft. Immediate replacement is required. Visit us today to get all
camshaft related replacement parts.
- Crankshaft &
Parts -
Damaged/faulty crankshaft directly affects the engine power and output. Buy
quality crankshaft replacement parts now.
- Powertrain Control
Module - P002A error code also relates to problems with
the powertrain. Find all the Powertrain related parts with us.
- Engine Timing Cover - The timing
cover is an essential component designed to protect the timing belt, timing
chain or cam belt of your car. Replace old timing covers today.
- Timing Belt And
Pulleys - Another reason for P002A error is the faulty
engine timing belt and its parts. To remove the error, immediate replacement is
in order.
- Exhaust Valve - There can be issues with the exhaust valve thus resulting in that check engine line on indication. Replace old seal valves now.
- Diagnostic Tool - In order to
detect the error, one needs high grade diagnostic tools. Visit us today to grab
amazing deals.
Symptoms Of OBD Error Code P002A
This fault may
cause reduced power, the engine may run rough, or the engine may crank but not
start. There is typically an illuminated Check Engine light as well. Visit
Parts Avatar Canada to get genuine replacement parts
and performance parts
for your vehicle. This error may also indicate problems that will likely
affect:
Common Symptoms
- Check Engine
Light will illuminate indicating error P002A code
- Engine lacks
power and reduces performance
- Increased fuel consumption
due to problem in fuel delivery system
- Unusual throttle
response and stalling
How To Correct P002A "B" Camshaft Profile Control Circuit/Open Bank 1
Some of the common fixes for the problems in the OBD Code P002A for all makes and models are as follows;
- Use clean engine
oil and the one with proper specification for the vehicle
- Remove
accessories needed to gain access to engine timing cover
- Inspect
timing belt, timing covers and pulleys for needed parts and reinstall after
inspection
- Check
for cooling system leaks and check for proper engine operation and engine
timing
- Replace
camshaft sensor and/or crankshaft sensor and also check for its wiring
- Check
if the replacement of PCM(Powertrain Control Module) is required
- Replace stuck valve
We
have stocked a wide range of best priced ECM/PCM
parts, Ford & Mazda transmission, Car harness/wiring,
solenoids, fuel pressure regulators and a lot more to help you out in fixing your car.
Easy Diagnosis Of Engine Error OBD Code P002A
Following are the steps to be followed for a proper diagnosis of OBD Code P002A;
- A technician
begins by hooking the vehicle to an OBD-II scanner to verify that the code is
present, and check for other codes.
- The
freeze frame data along with current data is recorded, and the codes are then
cleared to see if they reoccur.
- Visual
inspection of the wiring and connectors to check for loose connections,
corrosion, or shorts is done.
- A
specialized tool may be used to test the camshaft sensor. Other tests of the
crankshaft and camshaft components may help pinpoint the problem, as well as
inspection of the timing chain or timing belt.
- If there is any physical problem with the timing belt this could cause the timing to go off far enough to trigger a code P002A.
Common Mistakes When Diagnosing OBD Code P002A
Most of the time
the camshaft is immediately replaced without analyzing the problem as per the
OBD code error. Thus, proper scan tools need to be used to check for the real
cause of the problem that may be ECM, wiring issues, fuel system problems and
many more parts other than the camshaft only. Thus, proper evaluation and
remedy is advisable.