P0008 OBD Error Code: Problem & Solutions

<<See All OBD Codes

If you experience some damage in the wiring and an internal damage in the ECM and Engine timing, then it might be indicative of OBD Code P0008 error.

P0008 is a fault code which indicates some issue with the Engine Control Module (ECM). It detects a variation in the mechanical timing between the crankshaft and bank 1 camshaft.

Want to know something more about OBD Code P0008? A signal from the camshaft position sensor is used by the engine control module to decide the exact time to fire the fuel injector as well as the ignite the spark plug. The signal from the crankshaft is compared by the PCM so that it could determine is the engine is timed properly or not. A variable timing system is used by the newer vehicles so that it could adjust the timing of the camshaft in relation to the crankshaft. It is done to increase the overall fuel efficiency as well as the performance. The generic code P0008 would start to trigger if the camshaft is not in the correct position relative to the crankshaft

What causes this problem with the Engine Positions System Performance?

• Engine timing may get out of sync
• There might be some damage in the wiring
• The camshaft or crankshaft sensors may start malfunctioning
• The timing chain can get stretched
• Issues with the timing chain tensioner
• The timing components such as gears, guides and chains may get worn-out
• ECM software may be out of date
• An internal damage in the ECM

1. Timing Chain - The main indicative of OBD Code P0008 is a faulty Timing Chain. Immediate replacement is required. Visit us today to get all Timing Chain related replacement parts.
2. Timing Belts - P0008 error code also relates to problems with the Timing Belts. Find all the Timing Belts related parts with us.
3. Timing Gears - Another reason for P0008 error is the faulty Timing Gears and its parts. To remove the error, immediate replacement is in order.
4. Timing Chain Tensioner - P0008 error code also relates to problems with the Timing Chain Tensioner. Find all the Timing Chain Tensioner related parts with us.
5. Timing Chain Guide Kit - Faulty Timing Chain Guide Kit are the first reasons for the error P0008. Visit us and replace them immediately.
6. Camshaft Sensor - Check out the necessary Camshaft Sensor you might require while solving and detecting the OBD errors for your car.
7. Crankshaft Sensor - Any problem in the crankshaft with directly hamper the engines performance. Buy quality crankshaft replacement parts now.
8. Engine Control Module - Faulty Engine Control Module are the first reasons for the error P0008. Visit us and replace them immediately.
9. Powertrain Control Module - P0008 error code also relates to problems with the PCM if there is any issue with the sensor or electrical connection causing problems with receiving proper signal. Find all the Powertrain related parts with us.
10. Diagnostic Tool - In order to detect the error, one needs high grade diagnostic tools. Visit us today to grab amazing deals.

Apart from the Check Engine light illumination, you may also start noticing some drivability related issues. Some of the most common symptoms of this error code include:

Common Symptoms

• An illumination in the malfunction indicator lamp
• You may start feeling roughness while accelerating
• Decreased in the power
• There might be some sort of noise coming from the timing chain
• Decrease in the amount of engine performance
• The overall fuel consumption may start increasing

It is very important to fix the fault code P0008. So here are some ways with which you can correct this issue:

• A professional scan tool should be connected to check if the code exists or not
• You must perform some research from professional sources for testing and values based upon the code
• Inspect if there are some other fault codes which may be related to this issue and try to clear the error codes to check which fault codes actually return
• The scan tool data from the ECM related to the code should be analysed and you must try to road test the car while analysing the scan tool data from the ECM. Carefully check if the P0008 code returns or the symptoms exist
• The issues listed above like the noises, wiring, etc should be visually inspected
• If you find out that the problem is appearing again and again, then diagnose the problem with the special tools listed above
• Carefully analyse the signals and wiring from the sensors using a digital voltage scope to determine where the problem actually exists
• The need to remove the timing/ front engine cover may be required if the signals and scan tool values are within specification
• You must verify the timing marks on the crank and camshaft sprockets align
• You can find some signs of wear, so that’s why you must inspect the condition of the timing chain/belt and guides
• The component which would be found damaged during the testing should be replaced

Just visit Parts Avatar Canada if you are facing any such issue. We have stocked a wide range of best priced Timing Belt, Powertrain Control Module and Throttle Position Sensor and more to help you out in fixing your car.

An advanced scan tool is used to properly diagnose P0008 fault code which is capable of factory sensor readings as well as codes to start. A technician which is well qualified would be able to read the data from the scan tool and would tell that exactly when and where the issue actually occurred or if the problem is still occurring. They can always clear the code from the ECM and take a test drive of the vehicle. This can be done while monitoring the scan tool data to see if the fault returns or if it is intermittent.

If you find out that the fault is irregular, then it would be a good idea to visually inspect the wiring as it can produce more results. Or else the vehicle will have to be driven until the problem becomes more tenacious. Now if you find out that the fault has returned back immediately, then your issue would be narrowed down with the help of scan tool as well as information from the professional resources. Or else you may require a digital voltage scope which would help in monitoring the sensor signals. The signals which are coming would indicate what the ECM is actually seeing and if they are correct or not. If you want to verify the timing, then the front timing cover of the engine should be removed. Now as per the results of the testing, then the clearing of the code, road testing while monitoring the data, then later diagnosis may be required. Some tools may be required for diagnosis, they are mentioned here below as follows:

• It is important to read the values of the ECM and that’s why an advanced scan tool would be required
• A digital voltage scope with attachments
• To access the sensors and timing components, you may need some basic hand tools

Common Mistakes When Diagnosing the P0008 Code

The technicians who are inexperienced may start assuming that the engine needs a new timing chain or belt based upon this code. There are chances that the owner of the vehicle could spend several hundreds of dollars on the problem which would still not get solved in the absence of performing a proper diagnostic procedure. You can solve this issue with a simple computer learn procedure or reprogramming. Make sure that you don’t spend hundreds of dollars to only fix their car issues which could be easily fixed in less than an hour.

P0009 - Engine Position System Performance Bank 2