Error Code P0007: What It Means & What To Do?

<<See All OBD Codes

Do you know that P0007 error code is related to an electrical circuit? This circuit starts connecting from the engine computer to the fuel system and it is generally found in diesel engines. It can also be related with some other fault codes like P005 and P006.

Willing to learn something more about P0007 code? Parts Avatar Canada is here for you. The P0007 fault code appears when there is some problem with the Engine Control Module. The ECM may stop receiving right signals from the fuel shutoff valve. Now you must be thinking that where fuel shutoff valve is actually located. It is situated at the fuel supply rail mounted to the car engine. The fuel shutoff valve is used by the engine to prevent the fuel from entering the car engine when it is turned off. If you will do this, your car engine would stop continuing to run after the key is turned off with the help of the valve. If the code appears, then it would cause dieseling or else it can also prevent the car engine from starting. This would cause in turning on of check engine light.

What causes this problem with the Fuel Shutoff Valve "A" Control Circuit/Open?

• There might be some damage to the valve’s connector
• A wire which is broken might be going to the ECM
• Some faults in fuel shutoff valve
• The ECM might get damaged internally

1. Fuel Shutoff Valve - The P0007 code can also arise due to some issues in Fuel Shutoff Valve. So it is advised to replace them as soon as possible.
2. ECM - Common cause behind this P0007 error code can be some fault in engine control module. So it will be a good decision to replace them now.
3. Fuel Shut Off Solenoid - Engine Control Module is perfectly fine but still but having that trouble code P0007 flashing? In such a situation your Fuel Shut Off Solenoid might be faulty. Why don’t you think of getting that replaced?

The check engine light may be produced due to which P0007 code would be depicted. Have a look at some of the symptoms below:

Common Symptoms

• The engine may keep on running even after the key has been turned off
• Due to lack of fuel pressure, car engine might not start
• Possible stalling while idling or driving

Here is the most common procedure with which you can repair P0007 code:

• Check if the code exists or not, and for that you must connect a professional scan tool
• Research from professional sources should be performed for testing and values which are based upon the code
• There can be some other fault codes as well which may be related to the issue
• Try clearing the fault codes to see which fault codes actually return
• It is very important to analyse scan tool data from the ECM
• Road test the vehicle while analysing the scan tool data from the ECM with other tools attached
• You can always check if the P0007 code returns or the symptoms exist
• The items listed above like wiring, voltages, etc. should be visually inspect
• Use some special tools listed above to diagnose the problem if it keeps on repeating
• Carefully analyse the signals and wiring from the sensor to determine where the problem actually exists. Now if al the signals are fine, then further testing of the wiring, computer, or fuel system is required
• The fuel shutoff valve, wiring, or any other faulty component should be replaced

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of Throttle Position Sensor, Crankshaft Sensor, Crankshaft Position Sensor and many more. Now all your problems would vanish within no time.

You should use a scan tool as well as a voltage meter to properly diagnose P0007 code which is capable of factory sensor readings. A technician which is well qualified would be easily able to read the data from the scan tool and then would be able to determine that where the problem has exactly occurred and if it is still occurring or not. After that they can clear the code from the ECM and then later test driving of the vehicle can be done to check if the fault code returns back or is still constant.

Then the other step is to inspect the connectors as well as wirings. This can be done by cutting open the protective covering, inspecting the wiring harness, repairing the problem, and replacing the covering.

Now later based upon the conditions of the testing, possible clearing of the code(s), and a road test while monitoring the data, further diagnosis may be required. Diagnosis will require multiple tools such as:

• An advanced scan tool which is capable of reading the ECM data values
• A digital voltage meter with attachments
• Some general hand tools to access the sensor and wiring
• A razor blade to cover the wiring harness

Common Mistakes When Diagnosing The P0007 Code

If you are thinking that by just replacing the fuel pressure shutoff valve it would turn into a successful repair then it may be very expensive as well as would involve a lot of labour. This can be caused by various other components in the electrical system and wiring as listed above or even more. Visual inspection and testing with the equipment listed above will verify your issue before you begin to replace the fuel shutoff valve without any reason.

P0005 - Fuel Shutoff Valve "A" Control Circuit/Open

P0006 - Fuel Shutoff Valve "A" Control Circuit Low