Guide To P0003 OBD Error Code Solutions

<<See All OBD Codes

Is your engine stalling or are you struggling with lowered fuel efficiency? Is your vehicle eating up too much fuel? If your answer to any of these questions is “YES” then there are chances that your car has developed the obd error code P0003. Wondering what is an obd error code P0003 indicates? Well, OBD Code P0003 is a generic OBD-II code that Indicates that your Fuel Volume Regulator Control Circuit is low.

Now when you know what is OBD code P0003 indicates, let's talk about what exactly is the function of the fuel volume regulator. The fuel volume regulator allows your vehicle fuel system to let go of the excessive fuel back to the fuel tank from the engine. The engine control module (ECM) regulates the fuel pressure from the fuel pump going to the engine. When no proper voltage signal being sent by the fuel volume regulator is detected by ECM is starts flashing a Check Engine Light and this obd P0003 code.

What causes this problem with the fuel volume regulator control circuit?

• One of the causes could be the corrosion of the sensor connector
• A short circuit in the sensor wiring to the ECM can be another cause
• A defect in the fuel pressure regulator
• Damage to the ECM
• Faulty Fuel Volume Control Valve
• Also, a fault in the fuel volume control valve circuit

1. Fuel Pressure Regulator - If you really wish to get rid of this P0003 code with your fuel volume regulator circuit, you might need to buy a brand-new fuel pressure regulator for your beloved vehicle.
2. Fuel Volume Control Valve - Another part that you might need to get checked and replaced is fuel volume control valve.
3. Powertrain Control Module - Replacing the fuel pressure regulator and fuel volume control valve is not enough, you might also need to replace the damaged powertrain control module.
4. Engine Control Module - If you really want your ECM to work in best possible condition to allow the smooth functioning of the engine, you will need to replace the damaged ECM with a new one.
5. Auto Fuses - When OBD code P0003 flashes on your instrument panel, chances are that there is a problem not only with your fuel delivery system but also with the auto fuses. Replace these damaged fuses with brand new ones only at Parts Avatar Canada.
6. Diagnostic Tool - In order to be that DIY guy, you need to few diagnostic tools to get your car problems pointed out easily. Our diagnostic tools collection will come handy to do so, So why not have a look?

Interested in knowing the symptoms to obd code P0003? If yes then you have arrived at the right place. We at PartsAvatar have listed out few common symptoms associated with this fuel volume regulator control circuit error.

Common Symptoms

• Your engine might start performing low
• Your Engine might start stalling
• Your vehicle’s fuel consumption will increase substantially
• Blown out fuses is another common symptom for error code P0003
• Electronic Control Module damage is a possible symptom
• Your vehicle’s exhaust might start emitting black or white smoke
• Another common symptom associated with this code is damage to the catalytic converter of your exhaust system.

Some of the most common fixes for this P0003 code with Toyota, Chevy, Ford or any other make includes

• First and foremost, step is to connect a professional scan tool in order to Verify that the actually code exists.
• Next, you will need to check for any other fault codes which may be related to the issue, then clear the fault codes to see which fault codes return.
• Another step on the list is to analyze scan tool data from the Electronic Control Module.
• Next you will undergo a road test while analyzing the scan tool data from the ECM with other tools attached.
• After this verify if the P0003 code returns.
• Inspect all of the related parts such as wiring, voltages, auto fuses to detect any issue if persists.

In case the problem persists and you need parts to fix it you can have a look at our extensive collection of auto parts. We have stocked a wide range of best priced Fuel Pressure Regulators, Wirings and Auto fuses and a lot more to help you out in fixing your car.

Now if you wish to diagnose the obd error code P0003, you will need various diagnostic tools to do so. We have prepared a small list to assist you in doing so.

• Advanced Scan Tools
• Voltage Meter
• Diagnostic Tools

Once you connect a scan tool and it is done with its scanning and reading, you will be in a condition to diagnose the problem yourself. You will need to clear the code, and undertake a road test while monitoring the data. Also, further diagnosis may be required.

Common Mistakes When Diagnosing The P0003 Code

If you think that just replacing the fuel pressure shutoff valve will successfully solve your obd code P0003 issue then you are mistaken. Moreover, it might dig a hole in your pocket. This error code might be caused by several other components such as fuses, wirings etc.

A proper inspection with specialized diagnostic tools is needed to verify your issue before you replace the fuel shutoff valve. Also, you will need proper advanced scan tools and voltage meter to ensure that the fuel shutoff valve requires replacement or not. You might need additional inspection and testing.