Buick Regal Ignition Wire Sets
About Ignition Wire Sets
Vehicles with ignition systems in distribution style use ignition wires to transfer electric current from the distributor to specific spark plugs, depending on the timing of their firing order. A distinct wire is fed into each thick spark plug cable, which can hold 40,000 Volt or more from the ignition distributor cap. One end of each cable is fitted with a boot on the cap, whereas the other end has a boot on the spark plug. Ignition wire comes with the motor cylinder number in a package. The spark is passed by the Ignition Wire pack to the spark plug that ignites the air-fuel mixture, starting the engine, from the distributor or ignition coil. The ignition cables are also known as the spark plug wires. Over time the cables are brittle and break. Ignition wires must also be substituted as the cables may break or as an engine tuning, the electrical connection wears out. That makes entry into the motor cylinder more difficult for the Spark, resulting in motor fires that prevent the engine from running smoothly or roughly. If one of the ignition wires went wrong, the car can still start and drive but will run badly. voltage is not passed from the ignition spiral to the spark plugs, If one or more ignition cables fail, and fuel will not be ignited. The catalytic converters can also be impaired by driving with bad ignition wires for long times. At least every 60,000 miles, Ignition wires should be replaced, but any time the car is serviced, it's a good idea to check the entire ignition system. The ignition wire from every spark plug is only long enough to reach the dealer without distortion. Each end of a spark plug wire is cut by a metal end on the plug and flame distributor.
What is the purpose of Ignition Wire Sets?
The ignition cables are a part of the ignition system, usually called the spark plug wires. This is the duty of the ignition cables to deliver the spark of the engine to the spark plugs of the engine from the ignition coil or distributor.
How Ignition Wire Sets Works?
A spark ignites fuel in the engine. This starts with the ignition coil, which converts the power of low voltage into extremely high voltage. This high voltage is transferred to the spark plug through the ignition cables, where a spark is produced which ignites the fuel of the engine and power the engine.
Where is Ignition Wire Sets Located?
The one end of the ignition wires is linked to the spark plug on the cylinder head and the other end of the ignition wires are connected to the distributor. The full assembly is placed on the engine below the hood.