Vented Rear Disc Brake Rotor - RAYBESTOS Element 3 - 982498FZN

Raybestos Element3 Coated Brake Rotors use an exclusive finishing technology. This technology can coat each rotor’s entire surface, including the cooling vanes. The Grey Fusion 4.0™ coating is a corrosion-resisting coat and significantly retards the rusting process. The Raybestos-coated rotor is best suited for drivers in rust-prone areas, such as coastal regions with high humidity and areas where aggressive snow and ice accelerate rotor corrosion.

• Offers consistent, superior performance
• Construction that facilitates ultra-smooth operation
• Composition optimized for maximum frictional life
• Manufactured in accordance with OE standards and made with G3000-qualified material, guaranteeing form, fit, and function for trustworthy braking
• The entire surface is coated with an exclusive full Grey Fusion 4.0 coating. The rotors are salt spray tested for 300 plus hours
• Matches or exceeds the OE requirements for car and truck rotors
• Certifies the coating that prevents rust and corrosion
• By coating the cooling vanes on Element3 Coated Rotors, it prevents the vanes from rusting, providing better airflow and cooling
• Meets SAE standards for tensile strength, providing structural integrity and maximum service life
• A non-directional ground finish produces a product that is ready to be installed right out of the box
• Lateral Runout & Thickness Variation: The lateral runout of the rotors is 0.004" with a thickness variation of less than 0.0005”, ensuring less pedal pulsation, less brake noise, and increased pad life
• Element3 coated rotors are mill balanced and fully validated, resulting in less rotor thickness variation, proper balance, reduced vibrations, and quieter and smoother stopping performance