RAYBESTOS Element 3 - 980113FZN - Vented Rear Disc Brake Rotor

Raybestos Element3 Coated Brake Rotors use an exclusive finishing technology. This technology can coat each rotor’s entire surface, including the cooling vanes. The Grey Fusion 4.0™ coating is a corrosion-resisting coat and significantly retards the rusting process. The Raybestos-coated rotor is best suited for drivers in rust-prone areas, such as coastal regions with high humidity and areas where aggressive snow and ice accelerate rotor corrosion.

• Offers consistent, superior performance
• Construction that facilitates ultra-smooth operation
• Composition optimized for maximum frictional life
• Manufactured in accordance with OE standards and made with G3000-qualified material, guaranteeing form, fit, and function for trustworthy braking
• The entire surface is coated with an exclusive full Grey Fusion 4.0 coating. The rotors are salt spray tested for 300 plus hours
• Matches or exceeds the OE requirements for car and truck rotors
• Certifies the coating that prevents rust and corrosion
• By coating the cooling vanes on Element3 Coated Rotors, it prevents the vanes from rusting, providing better airflow and cooling
• Meets SAE standards for tensile strength, providing structural integrity and maximum service life
• A non-directional ground finish produces a product that is ready to be installed right out of the box
• Lateral Runout & Thickness Variation: The lateral runout of the rotors is 0.004" with a thickness variation of less than 0.0005”, ensuring less pedal pulsation, less brake noise, and increased pad life
• Element3 coated rotors are mill balanced and fully validated, resulting in less rotor thickness variation, proper balance, reduced vibrations, and quieter and smoother stopping performance