Power Steering Pressure Hoses

The power steering hose connects the power steering pump to the cylinders that enables a vehicle to turn left and right easily. it takes a pressurized power steering fluid right into the steering rack and uses it to control a steering wheel's rate of turn. It contains resistant fabric cover and a patented synthetic rubber tube and is outfitted with standard steel reusable fittings. The power steering systems are made up of two hoses - a high-pressure hose and a low- pressure hose. Made up of a reinforced synthetic compound, the high-pressure hose has hose fittings that are usually double-flared compression fittings while the low-pressure hose may not use compression fittings due to the lesser amount of pressure that passes through it.

Power Steering Pressure Hoses Categories

Videos

Loading...
Partsavatar ca Car Parts Prevent Steering Failure Magna Pure® In Line Power Steering Filters
Loading...
Partsavatar ca Car Parts Power Steering Pump Misdiagnosis Dirty Reservoir Screen
Loading...
Partsavatar ca Car Parts Power Steering Noise Check Your Remote Reservoir

Power Steering Hose by Dorman

Power Steering Reservoir Line Hose

Loading...
A necessary replacement part for restoring safe, reliable operation of the power steering, Dorman's Power Steering Reservoir Line Hoses are engineered from high-quality materials for optimal performance. Our return hoses are extremely durable against high pressure pulsation, oil, ozone, and heat, ensuring a long service life.
* Direct replacement for a proper fit
* Molded-rubber return hose design simplifies installation and eliminates fluid restriction (where applicable)
* Easy to install
* On-vehicle, performance, and functional testing have been conducted on this part to ensure trouble-free operation

Power Steering Hose By GATES

PS188 Power Steering Hose

Loading...
Recommended for Power Steering Pressure Lines
* Synthetic rubber hose cover developed specifically to resist rugged under-hood environments Type CSM
* Use with one-piece Gates PowerCrimp(r) power steering couplings (Refer to catalog 431-2080 for details)
* Meets SAE J2050 Type 1 performance requirements
* Packaging: 25 ft. or 50 ft. lengths
* 25 Foot Part No. 86049
* 50 Foot Part No. 86050

Power Steering Hose and Pumps by Gates

Power Steering System

Loading...
PS188 Power Steering Hose
Recommended for Power Steering Pressure Lines
* Synthetic rubber hose cover developed specifically to resist rugged under-hood environments Type CSM
* Use with one-piece Gates PowerCrimp(r) power steering couplings (Refer to catalog 431-2080 for details)
* Meets SAE J2050 Type 1 performance requirements
* Packaging: 25 ft. or 50 ft. lengths
* 25 Foot Part No. 86049
* 50 Foot Part No. 86050

Bulk Power Steering Return Line Hose Without Couplings

Loading...
Allows "Custom Fit" Cutting and Assembly for Low Pressure Fluid Return Lines
Features
* Use with return line end fittings if required
* Nitrile tube, neoprene cover
* Meets OEM power steering return line and SAE J189 requirements
* Temperature rating: -40°F to +275°F (-40°C to +135°C)
* Packaging: Individually boxed

High Temperature 300° CPE Power Steering Return Line Hose

Loading...
Special High Temperature Tube and Cover Designed for Today's High Underhood Temperatures

* For use on late model vehicles
* Use with return line end fittings if required
* Meets SAE J189 requirements and SAE J2076
* Temperature rating: -40°F to +300°F (-40°C to 150°C)
* Packaging: Available in 25 ft. lengths

OEM Type Power Steering Hose Assemblies

Loading...
Gates Extensive Field Examination and Testing Ensure Proper Fit
Designed for passenger cars and light trucks. General instructions are packed with every assembly. Hoses and fittings are also available for tailor-made medium and heavy-duty truck applications.
* Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, bracketry, sensor ports, sheathing, bushings and grommets
* Exceeds SAE J2050 performance requirements
* Packaging: Individually bagged