The trouble code P0963 can be explained as Pressure Control Solenoid "A" Control Circuit High. There can be a lot of situations where the automatic transmissions will include at least three pressure control solenoids which are known as solenoid A, B and C. The transmissions which are new would have more gears as well as more solenoids. There are a lot of error codes which are related to the "A" solenoid control circuit and some of the most common include P0960, P0961, P0962 and P0963. If the powertrain control module would detect an issue with the transmission pressure control solenoid "A" control circuit, then it would give rise to the P0963 trouble code. The particular code which is triggered depends upon the specific fault which the PCM has detected.

We believe that an investment in knowledge pays the best interest. So why not learn more about the P0963 error code? It is a generic powertrain code which is associated to the transmission. It includes the defects in the pressure as well as some faults in the sensor. If the engine control module would receive a signal that the pressure control solenoid for the A control circuit is high, then the P0963 trouble code would start flashing up.

What causes this problem with the Pressure Control Solenoid "A" Control Circuit High?

• Imperfect transmission pump
• Faulty or damaged wiring
• PCM might be flawed
• The connector might be burned
• Defective pressure control solenoid
• Some issues related to the transmission valve body
• Problem of congested hydraulic passages
• Polluted transmission fluid
• Compact transmission filter

1. Automatic Transmission Filter - A faulty Automatic Transmission Filter can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Electronic Control Unit - If everything is alright with PCM, then there is surely some defect in Electronic Control Unit. Get it replaced before the situation gets worse.
3. Powertrain Control Module - P0963 code can display due to some defects in the Powertrain Control Module. So it is very important to replace the Powertrain Control Module with us at equitable prices.
4. Auto Transmission Control Module - Do you remember when was the last time you got your car Auto Transmission Control Module checked up? A dirty Auto Transmission Control Module can cause a lot of issues like displaying P0963 code.
5. Body Control Module Component - Poor engine wiring can cause a lot of difficulties, so why not get it replaced at time?
6. Automatic Transmission Fluid - There can be some issues with the Automatic Transmission Fluid due to which you may see P0963 code appearing over and over again. Visit us to buy best quality Automatic Transmission Fluid online.
7. Engine Control Module - Are you facing some faults in your Engine Control Module? Don’t worry and get them replaced or else P0963 code can turn up.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0963 here:

Common Symptoms:

• High temperature in the transmission
• Transmission glide when shifting
• There can be expansion in the fuel consumption
• Some misfire symptoms might exist
• Visibility in the check engine light
• Transmission may relocate heavily
• The transmission is placed into limp mode by the ECM/PCM

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• You must fix the defective PCM
• Make sure to mend the faulty valve A pressure control solenoid
• It is essential to remove the hydraulic blockages from the transmission
• Rehabilitate the defaults in the transmission
• The malfunctioning wires and connectors in the system should be repaired or replaced as per the need
• Carefully adjust the faults in the transmission fluid
• Recondition the non-functioning transmission control module
• Adjust the flawed high pressure pumps

Parts Avatar Canada endeavour’s to fulfil all the needs of its consumer, that’s why we have a huge collection of top quality Transmission Oil, Manual Transmission Fluid, Honda Transmission Fluid, Pcm Car, Atf Fluid, Toyota Transmission Fluid, Atf Oil and many more at equitable prices. We won’t let you down in any way.

This code is related to P0960, P0961 and P0962.

Here are some steps which you should follow in order to diagnose this fault code:

• You must have an OBD scanner if you want to diagnose the P0963 error code conveniently.
• A reliable mechanic will use the scanner to look at the freeze frame data and collect the information related to this code.
• The mechanic should also inspect for any additional trouble codes that have been detected.
• In the event that there are additional codes, they should be addressed in the order in which the scanner shows them.
• After that there would be a need to reset the codes, and the automobile will be restarted, so the mechanic can see if the code returns.
• If it is not returning again, then the code was likely flashed up by an intermittent problem.
• If the P0963 code does return following the reset, then the technician should start by checking the vehicle’s transmission fluid.
• If the fluid level is too less, then it should be refilled, and if it is dirty, it will be flushed out and then should be restored.
• However, if the transmission fluid is drastically contaminated, then there is likely a significant matter with the transmission, which will likely need a rebuild or a complete replacement.
• Next, the mechanic will visually examine the electrical constituents in the system, checking for any shorted or open wires, or loose or corroded connectors. Restore all the defected constituents.
• A manual pressure gauge can then be hooked up to the hydraulic pump system, and the mechanic can see if the pressure is below the specifications of the automobile.
• If it is, this suggests a blockage matter, or a quirky pump, solenoid, or pressure regulator.
• If the error is still there, then a thorough inspection of the transmission is likely in order.
• It’s imperative that the mechanic reset the trouble codes and restart the vehicle whenever a constituent is restored.
• This will allow the technician to see exactly when the problem has been settled.

Common Mistakes When Diagnosing The P0963 Code

• There can be a lot of issues which might appear when the P0963 error code start flashing up.
• Many a times the mechanic might not react properly and would just replace the high pressure pumps and entire transmissions when in reality the simpler components should be checked first properly.