Leaf Kit by HELLWIG - 2527
Buy Online & Select Delivery
Product Highlights
- Design Improvement over Manufacturer specifications
- Problem Solver
- Design improved over OE specifications
- Daily Commute Tested
- Excessive Weather Resistance
- Durable for the tough situations
- Enforced Material for added protection
- Precision sizing of installation location
- Improved Curvature
- Exact Size & Dimensions
- Elevated quality of materials used
- Increased part performance
- Material used in part build increases parts overall lifespan
- Decreases need for a future replacement over OEM
- Treated at OEM Specifications
- Corrosion Prevention
- Reduced Wear Activator
Product Overview
Hellwig Lp-25 Load Pro Series Rear Helper Springs are secondary leaf springs that work with OEM leaf springs and support extra loads. It is made for heavy hauling, work-truck use, or pulling 5th-wheel RV trailers. To install on full-size pick-up trucks and vans it requires mounting hardware (where applicable) to accommodate 2.53 or 33 wide OEM leaf springs. For “half-ton” vehicles, choose Hellwig Lp-25 Load Pro Series Rear Helper Springs because their load carrying capacity is up to 2500 lbs. They prevent leaf spring from distortion due to continuous load compression. They manage proper rear ride height. When you are towing, Hellwig Lp-25 Load Pro Series Rear Helper Springs reduces bouncing at the rear side of your vehicle.
- As the load increases Hellwig Lp-25 Load Pro Series Rear Helper Spring’s progressive design increases its resistance to the load
- Made with heat-treated ASTM 5160 alloy spring steel that maximizes strength and resilience
Product's Extended Description
- LP-25 Leaf Kit; 2500 lbs. Capacity; 3 Leaf Stack; Use w/43 in. Or Longer Base Leaf; Requires Mounting Kit PN[25250 Or 25300];
- """""""This Hellwig Helper Spring set the standard for all other aftermarket helper springs. Featuring Progressive Spring Rate and Fulltime Spring Rate design, this spring is the workhorse of the Hellwig Spring line. With the Progressive design the vehicle must be loaded and its spring compressed to activate the Hellwig Spring, therefore as the vehicles load increases the Hellwig Helper Spring progressively increases its resistance to the load. In the Fulltime design the Hellwig Spring immediately reacts to the vehicles load, therefore compressing very little as load is applied to the vehicle. Manufactured with heat treated ASTM 5160 alloy spring steel these units increase your vehicles level load carrying capacity up to the manufacturer's Gross Vehicle Weight Rating. Designed to install on full size pick-up trucks and vans, this unit requires mounting hardware to accommodate 2 1/2? or 3? wide leaf springs. When ordering be sure to identify the spring kit and the appropriate mounting hardware kit to complete the installation. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. """"""""Set it and forget it"""""""". The LP 25 is rated at 2500lbs level load carrying capacity and the LP 35 is rated at 3500lbs level load carrying capacity, not exceed the vehicles Gross Vehicle Weight Rating."""""""
- 2500 lbs. Capacity; 3 Leaf Stack; Use w/43 in. Or Longer Base Leaf; Requires Mounting Kit PN[25250 Or 25300]
HELLWIG
This product fits in a few models ofRam 1500 accessories, GMC Sierra 1500, Dodge Ram 2500, Chevrolet Silverado 1500, Dodge Ram 3500, Ford F350, Ford F250, GMC Sierra 3500, Chevrolet Silverado 3500, Chevrolet Silverado 2500, GMC Sierra 2500, GMC Savana 2500.
Fitting Vehicle(s)
Frequently Asked Questions
Ratings & Reviews
Share your thoughts with other customers