FRAM

Fram is one of the top leading brand in the world which manufactures aftermarket auto parts and known for their best oil filters. Fram also sells air filters, fuel filters, PCV valves, breather element filters, and similar products, almost all according to the needs of customers. Visit Fram.com to view their full range of products line.

Search FRAM Categories

Air Filter

Loading...

Automatic Transmission Filter

Loading...

Automatic Transmission Filter Kit

Loading...

Cabin Air Filter

Loading...

Fuel Filter

Loading...

Fuel Water Separator Filter

Loading...

Oil Filter

Loading...

PCV Valve

Loading...

Premium Oil Filter

Loading...

Exhaust Parts by Fel-Pro

Exhaust System Gaskets

Loading...
Exhaust system gaskets eliminate noise, keep hot exhaust gases from entering the vehicle and also help maintain proper pressure in the system. If they fail, driveability as well as safety can be compromised. The vehicle may also fail an emissions test. Fel-Pro(r) is always the best choice for solving exhaust sealing problems.
Differentiated Materials and Designs
Because exhaust system replacement gaskets aren't installed onto pristine surfaces in a factory setting, but onto imperfect surfaces in the repair environment, they must not only withstand heat and motion, they must also compensate for corrosion, pitting and warping. Combining years of aftermarket experience and advanced engineering expertise, Fel-Pro offers the ideal replacement gaskets through differentiated materials and product designs that address the unique demands and operating environments of each exhaust system repair part.
Products
Fel-Pro(r) offers exhaust system solutions for effectively resealing exhaust system joints and surfaces, and overcoming the heat and motion that cause gaskets to fail. Fel-Pro gaskets and sealing products include:
* Manifold gaskets
* Pipe flange gaskets
* Flange bolt & spring kits
* Converter / Connector / Crossover gaskets
* EGR gaskets
Technical Note
In some applications, a drilled hole in the EGR gasket is used to meter EGR flow. It's critical therefore that this hole be sized exactly to spec. Trust Fel-Pro to have the correct size metering hole for proper exhaust gas flow.

Spring and Bolt Kit by Fel Pro

HEAD BOLTS

Loading...
T-T-Y head bolts are engineered to stretch within a controlled yield zone. Once they reach this zone they spring back to provide a precise level of clamping force. This stretches the bolts into their elastic range. In some cases the stretching approaches the bolts' elastic limit, permanently stretching them. Reusing stretched T-T-Y head bolts can cause improper or uneven torque, damaged engine threads, and broken bolts, any of which could lead to head gasket failure. It is important to use new bolts and proper torquing procedures during reassembly.

Stretch Head Bolt Set by Fel Pro

Stretch Head Bolt Set by Fel Pro

Loading...
* NEWS
* BLOG
* FORUM
* EXPERIENCES
VALVE STEM SEALS
HEAD BOLT SETS
T-T-Y (TORQUE-TO-YIELD) HEAD BOLTS
T-T-Y head bolts are engineered to stretch within a controlled yield zone. Once they reach this zone they spring back to provide a precise level of clamping force. This stretches the bolts into their elastic range. In some cases the stretching approaches the bolts' elastic limit, permanently stretching them. Reusing stretched T-T-Y head bolts can cause improper or uneven torque, damaged engine threads, and broken bolts, any of which could lead to head gasket failure. It is important to use new bolts and proper torquing procedures during reassembly.
GET THE SPECS
Torque specifications are available at www.fme-cat.com
or downloadable in a pdf format at www.felpro-only.com
YIELD ZONE
When a Torque-To-Yield bolts are installed, they are first tightened to a specified torque rating. Then the bolts are turned by a specific number of degrees, which stretches the bolts into their yield zone.
* SITEMAP +

Gasket Sets by FEL-PRO

Gasket Sets by FEL-PRO

Loading...
HEAD SETS (HS)
Fel-Pro(r) Head Sets give technicians not only the gaskets the project requires, but the very best technology available. Head Sets are used for upper engine repair only, typically on a valve grind. They can be combined with a Fel-Pro Conversion Set (CS) to form a Full Set (FS) for the entire engine.
HEAD INSTALLATION SETS (HIS)
These sets are designed to save money by giving the technician the exact gaskets needed for installing an already reconditioned or fully assembled head. These sets do not include the valve stem and crankshaft seals that aren't needed, so technicians aren't forced to buy parts that aren't required.
CONVERSION SETS (CS)
Fel-Pro(r) Conversion Sets provide every gasket necessary for lower engine work. When combined with a Head Set, Conversion Sets can be used for a complete overhaul or as a Full Set.PermaTorque(r) MLS Head Sets give technicians all the parts they need for MLS head rebuilding and installation.PermaTorque(r) Head Sets feature the famous PermaTorque head gaskets.

Transmission Gasket by Fel Pro

CLEAN AND DRY

Loading...
Loading...
It's no secret that Fel-Pro(r) gaskets offer the most reliable seal for any repair job. Proper installation is the key to long service life, and installation practices are changing rapidly as gasket designs advance. In the past, it was not uncommon to coat a gasket with sealers, adhesives or RTV before installing it. Today, Fel-Pro offers many gasket designs with advanced leak sealing technologies built into the gasket. With these modern gaskets, RTV or other sealers can decrease the gasket's ability to form a reliable seal, causing leaks.
Fel-Pro PermaDryPlus(r) gaskets offer the latest in sealing technology. All PermaDryPlus gaskets feature proprietary in-house molded silicone rubber sealing beads bonded to rigid carrier construction. This provides a perfect fit - and with no adhesives - saving installation time.
Intake manifold gaskets have become problematic leak areas for several years now. PermaDryPlus intake manifold gaskets are designed to provide a permanent seal. They have an aluminized steel carrier that resists corrosion and is not susceptible to degradation from exposure to fuels, oils and coolants. In-house developed FKM fluoroelastomer resists all fluids and is used to create edge-molded seals, as well as primary and secondary sealing beads that provide additional sealing and compensate for corrosion-roughened surfaces. To ensure all of these technologies work in the way they were designed to, these intake manifold gaskets must be installed on a clean, dry surface with no additional sealants used.
Using RTV on the gaskets with FKM or silicone sealing beads causes multiple issues:
The sealer can chemically attack the rubber sealing beads and degrade them. RTV can act as a lubricant and cause the rubber gasket to slip out of place and split, creating an opportunity for leaks. Sealants can add thickness which creates uneven clamping force since the gasket will not be able to seat properly. Also, RTV can extrude out when the gasket is compressed, and it could end up in an oil or coolant passage and restrict or block flow.
In cases where a sealant is needed for installation of a Fel-Pro gasket, a FIT(r) Form will be included, along with the proper sealant. Only apply the sealant in the manner and locations directed. Intake manifold gasket sets may contain a small tube of RTV. This RTV is not to be used on the gasket face, but rather where the bottom corners of the gasket meet the end seals to fill the gap.
PermaDry(r) gaskets are intended for vehicles which used a molded rubber gasket as original equipment. These gaskets are made using Fel-Pro's proprietary molded rubber formulations and are precision engineered for each application. To guarantee a leak-free repair, PermaDry gaskets must also be installed without the use of additional sealants.
Fel-Pro head gaskets are also designed so that no additional sealers are needed. Modern facing materials and their pre-applied coatings, along with the proprietary coatings found on PermaTorque(r) MLS head gaskets, will compensate for minor surface imperfections, resist scrubbing, and provide the proper amount of torque retention to create a true no-retorque head gasket. Use no sealers, adhesives or other additives with these gaskets.

Exhaust Gaskets by Fel-Pro

Exhaust System Gaskets

Loading...
Exhaust system gaskets eliminate noise, keep hot exhaust gases from entering the vehicle and also help maintain proper pressure in the system. If they fail, driveability as well as safety can be compromised. The vehicle may also fail an emissions test.
Fel-Pro(r) is always the best choice for solving exhaust sealing problems.
Differentiated Materials And Designs
Because exhaust system replacement gaskets aren't installed onto pristine surfaces in a factory setting, but onto imperfect surfaces in the repair environment, they must not only withstand heat and motion, they must also compensate for corrosion, pitting and warping. Combining years of aftermarket experience and advanced engineering expertise, Fel-Pro offers the ideal replacement gaskets through differentiated materials and product designs that address the unique demands and operating environments of each exhaust system repair part.
Products
Fel-Pro(r) offers exhaust system solutions for effectively resealing exhaust system joints and surfaces, and overcoming the heat and motion that cause gaskets to fail. Fel-Pro gaskets and sealing products include:
* Manifold gaskets
* Pipe flange gaskets
* Flange bolt & spring kits
* Converter / Connector / Crossover gaskets
* EGR gaskets

Technical Note
In some applications, a drilled hole in the EGR gasket is used to meter EGR flow. It's critical therefore that this hole be sized exactly to spec. Trust Fel-Pro to have the correct size metering hole for proper exhaust gas flow.

Head Gasket by Fel Pro

Head Gasket by Fel Pro

Loading...
* Head Gaskets
* Manifold Gaskets
* Valve Cover Gaskets
* Oil Pan Gaskets
* Marine Engine Specific

STAINLESS STEEL CORE HEAD GASKET

Loading...
Federal-Mogul Motorparts engineers combine the best features of their race-proven performance head gaskets into trouble-free Fel-Pro(r) Marine stainless steel core head gaskets. These gaskets are designed specifically for 4-cycle marine engine applications, and their materials are compatible with both salt water and fresh water environments, assuring reliable sealing.
* 300 Series stainless steel core and combustion armors - resist rust and corrosion
* Anti-stick surface coatings - improve micro-sealing
* PermaTorque(r) construction - minimizes torque loss
* Printoseal(r) elastomeric sealing beads - provide positive fluid sealing.

PERMATORQUE(r) MARINE HEAD GASKETS

Loading...
Fel-Pro(r) PermaTorque(r) marine head gaskets use gasket core and combustion armors made of 300 Series stainless steel to resist rust and corrosion. They feature anti-stick surface coatings to improve micro-sealing, rubber/fiber facing material reinforced with KEVLAR(r) to minimize torque loss, and Printoseal(r) elastomeric sealing beads (where required) for positive coolant sealing.