Everything You Need To Know About Car Flywheel

It is a disc which is generally bolted to the crankshaft at the rear of the engine. There are a lot of purposes which are served by it. When we talk about the manual transmission vehicle, then it would provide one of the friction surfaces for the clutch.

Are you searching for the different types of flywheel? Then don’t worry! All you have to do is to have a look below and then all your doubts regarding its types would be cleared.

1. Single mass flywheel - There are a lot of factory standard flywheel which are generally made up of cast steel, heavy but hard wearing and durable. The most common type of light weight flywheel is generally composed of chrome moly or aluminum with bolt in friction plates. The best one would be the chrome moly, there can be some issues which can be caused by the aluminum ones if they won’t be fitted in the right manner.
2. Dual mass flywheel - These types of flywheel are designed in such a way that they can reduce the noise, vibration as well as harshness. They would work in a similar way to the sprung centre clutch disc in which they would utilize the springs to dampen driveline shock and harmonics. They would not be very suitable for the performance applications as they would be a lot heavier than a conventional flywheel and then they would be prone to failure under heavy use or in extreme heat conditions.

Are you searching how do the flywheel actually work? Then all you have to do is to have a look below and then you will be able to understand everything.

A weighty wheel which would require a lot of force to rotate on its axis is known as a flywheel. Now when the wheel would be in motion at high speed, it would keep on spinning unless it would be stopped by applying lots of force. When it would start rotating, then a great amount of kinetic energy would be preserved by it which would be later used by it to power up a vehicle or machine at the time of beginning the engine or speeding up. More energy would be stored by the flywheel if it would spin at a higher speed or if it would have higher moment of inertia, which would mean bulkier. It would always work best when it would be spinned faster rather than increasing its mass.

There are a few things which might cause your flywheel to malfunction. Watch for the following symptoms if you suspect a bad flywheel:

1. Slipping - The most common issues with the clutch is not generally the flywheel, but it is actually the clutch assembly itself. All the clutches would start wearing out and then can also start to slip.
2. Clutch Drag - The clutch drag is contrasting to slippage; it is a phenomenon which would occur when the clutch would start failing to release fully. It is the clutch drag which would make the clutch assembly to remain closer so that the engine could rpm during the shifting.
3. Pulsation - The flywheel as well as clutch assemblies both function in a similar manner to the disc brake assemblies, that it the reason why they might exhibit similar symptoms after warpage. If there is a certain amount of warpage or "run out", then it would be normal and then it would result in the constant heating and cooling.
4. Chattering - One of the most common issues is the clutch chatter which can start arising from a lot of malfunctions in the assembly. This issue might start arising when the clutch would “skip” on the flywheel, rapidly grabbing and releasing instead of engaging in a smooth way.
5. Dual Mass Flywheel Problems - A dual-mass flywheel is generally two-part unit. A smaller-diameter flywheel would bolt to the car engine and it would then sit inside of a drum-brake-like outer flywheel. The smaller flywheel would engage the larger one via a set of springs.

It is said that a workman is only as good as his tools, and it is definitely true when it comes to the car bodywork. It is vital to have the right tools to repair your Flywheel or else a straightforward job would turn into constant headaches. So that’s why we have listed out some invaluable tools below which you will need while repairing your Flywheel.

• Adjustable Wrench
• Transmission Fluid
• Flare-Nut Wrench
• Transmission Jack
• Drip Pan

If you are willing to buy some Flywheel related parts online, then you have arrived at the right place. We have all the Flywheel related parts with us. We promise that you will never regret your decision. Have a look at some of them below: -

Flywheel replacement cost can differ wildly depending on application, the brand of the Flywheel as well as who does the work. All you have to do is to replace your faulty Flywheel with us online and then you can leave your car to the mechanic and pick it up a few days later. Just be sure that the car mechanic is highly skilled and has a good reputation. Sometimes the additional service level might cost you more than what you have expected. We also recommend you to take pictures of your car before you leave it with them so that you are sure that later on it is returned back to you in an unharmed condition. There are many flywheel parts which might cost around $35 while others cost as much as $400. There are a lot of car mechanics which might charge about $90 to $110 per hour and the labour would charge around $500.