Learn All About Car Clutch Fork
What Is Clutch Fork?
The clutch fork is also known as the clutch arm or release arm. The motion would be transferred from the release mechanism to the release bearing and pressure plate. The clutch fork would stick through a square hole in the bell housing and then it would be mounted on a pivot. Now when the clutch fork would be moved by the release mechanism, it PRIES on the release bearing so that the clutch can be disengaged.
Symptoms Of Bad Clutch Fork
There are a few things which might cause your clutch fork to malfunction. Watch for the following symptoms if you suspect a bad clutch fork:
The description of the fork unclipping from the pivot stud would be the primary symptom of a faulty fork. There might be some stiffness which can come from the throw out bearing which would then slide on the trans input shaft. Now if the area of the shaft would get gummed up with the crud, then due to that the bearing might be stuck. Then it would be important to replace the parts as it would be a good idea.
Tools Needed For Clutch Fork
It is said that a workman is only as good as his tools, and it is definitely true when it comes to the car bodywork. It is vital to have the right tools to repair your clutch fork or else a straightforward job would turn into constant headaches. So that’s why we have listed out some invaluable tools below which you will need while repairing your clutch fork.
- Clutch fork
- Wrench
- Fine tooth
- saw Jacks
- 2x4
Top Brands For Clutch Fork
If customers trust a brand, then it would make them loyal, and if they are loyal, then they will surely buy more. We are well aware that customers want comfort, cheerfulness as well as satisfaction in their lives and that’s the reason why we offer top quality auto parts brands to our customers. We make sure to provide a positive experience to our consumers from the brands which we are offering so that they can form an opinion that a particular auto parts brand is trustworthy and would give them peace of mind while they are purchasing it for their car. Here we have listed out some top brands for clutch fork.
How To Change Clutch Fork?
Do you want to change your clutch fork on your own? Then have a look at the steps of changing the clutch fork below:
It might sound very complicated to install a clutch fork but it can be very easy job if you have the correct tools as well as knowledge about the cars as well as the manual transmissions. It is very important to install the clutch fork as it would control the shifting of the gear while the automobile would be in motion. Make sure to install this part in the right way so that injuries can be avoided while driving the car. a lot of your money would be saved if you would do this job all by yourself. Or else a lot of money would be wasted on paying the labour if the vehicle would be taken out to a professional. All you have to do is to carefully follow this step-by-step guide and then your clutch fork would be installed in no time. The list of tools as well as materials which would be required for this task are also mentioned below.
Step 1
The first and foremost step is to mount the car on the jacks. It is very important to mount the car carefully on the jacks so that it can be lifted up enough for the ease of task. Just keep in mind that there should be enough room so that one can easily slide underneath the automobile as well as enough room for maneuvering the 2x4 which would be utilized to help the transmission slide into place one the clutch fork would be installed.
Step 2
Then the next step would be to carefully remove the master cylinder. A small cylinder on the transmission is a master cylinder and it would push onto the clutch fork. The bolts of the master cylinder should be removed by utilizing the wrench and after that the cylinder should be taken off. Just keep in mind that you should not push on the clutch pedal from the car once this step has been performed.
Step 3
The clutch fork ball should be inserted into the bell housing. Now once this has been done, there would be some part of the excess ball stud which would be protruding for the bell-housing. There is no need to worry when this would be seen. It is very normal and this is how the installation of the clutch fork would work.
Step 4
After that the next step would be to secure the throw out bearing. The throw out bearing should be taken and then it should be installed onto the clutch fork and then the fork should be attached on to the ball stud. Just be sure that whenever this would be done, then it should be sliding it in with your fingers that the clutch fork would be on the bearing and not in between the bearing and the transmission or else it might not work.
Step 5
It is very important to cut the ball stud. Carefully search for the ball stud in the bell-housing and then make a mark where it would be protruding. Now once it would be marked in the right way, then a fine tooth saw should be used to cut the ball stud. Now once you have cut it carefully, then the ball stud should be replaced back into the bell housing.
Step 6
The clutch fork should then be attached. Now once the ball stud has been secured into the bell-housing, then some grease should be applied on it and then the clutch fork should be reattached to it. The transmission should then be slid back into place by placing the 2x4 between the transmission and the jack. Then it should be bumped right in by utilizing another piece of wood. It would then wriggle in easily. The transmission should be slided enough so that the throw-out bearing would be lightly meeting the clutch fork. Then it would be time to reattach the master cylinder. Your job would be then completed.
