Don’t know about the sun visors? No worries, Parts Avatar has got you covered! Here we have mentioned everything you need to know about sun visors. A sun visor is a part of the automobile that is situated on the interior, that is just above the windshield, also referred to as windscreen. The mechanism is designed in such a way that it has a hinged flap that is adjustable. It helps greatly in keeping sunlight away from the eyes of the drivers and passengers.

Here we have listed all the types of sun visors:

1. Manual - You can rotate these type of sun visors manually in a downward position. So, you can easily pull it down as soon as the sunlight starts hitting your eye and push it back immediately as soon as you don’t need it. Also, it’s not time consuming as you won’t have to spend a lot of time installing as it comes with built-in metal attachment rods. Plus, it has some added benefits like you can use it as a wallet to store your essentials. If you are looking for extra protection and storage then this is your perfect fit.
2. Automatic - This type of sun of a sun visor has an in-built motor and a sensor that helps greatly in adjusting its position as per requirements. It is also useful when you drive under harsh and direct sunlight as it comes with a tinted, transparent material. It has no effect on the visibility too. The automatic sun visors help a lot if you frequently travel under sunlight as it detects and blocks blinding reflections accurately (especially those bouncing off the bumpers and rear windows). It aids in keeping the interior cooler when the vehicle's parked. So, if convenience is your priority above extra storage, then this is your go to sun visor.

Here we have listed here all the important features of sun visors and how it makes a huge difference on scorching sunny days:

1. Lowers the temperature inside - So when you block and reflect the sun, it helps in lowering the temperature inside the car. This further makes breathing and travelling in your easy. Also, this blockage of direct sunlight greatly prevents the discomfort caused in driving with heated steerings and interior.
2. It protects the electronics present inside the car - All the car stereos and CDs get damaged by direct sunlight and exposure to heat. Also, nowadays, a lot of cars have touch screens that are all the more prone to getting damaged in this excessive heat.
3. It offers protection to the interior - Sunlight can damage the car’s interior to a great extent that include dashboards and seats as they tend to fade. Not only fading, but at times they can also crack and warp due to this extreme temperature. So, we advise you to not think in making this small investment towards better.

Not sure about the functioning of the sun visors? We have mentioned it below:

So, the sun visors are a scrap of fibreboard that is covered with vinyl or fabric that is further connected to a hinge. The hinge enables the visor to flip down, thus blocking direct sunlight to the side window or up and out. Almost all of them have mirrors. A number of them have an auto equivalent of a fanny pack (CD holder). Also, in the current times, we have moved beyond the average sun visors too ones that serve innumerable benefits. It leaves enough space of the windshield clear so that there isn’t a problem in driving.

Sun visors have a number of benefits, some of which include: protection of the eyes of driver from hitting direct sunlight and also providing extra storage for a number of accessories.

Here listed are few symptoms that are indicative of a damage in the sun visors:

There are a number of symptoms that indicate a problem in the sun visor such as broken hinges that need replacement. Also, a number of problems arise when you stuff too much into the visor that ultimately weighs it down. If this happens, you should immediately put away all the heavy items present in the sun visor and that will fix the problem. The lights and mirrors also tend to get damaged after a certain period of time. Contact a mechanic if such a thing happens for a repair or a complete replacement as there are times minor electrical issues.

Do you like repairing your car on your own? Thinking of opening up your own car body shop? It is a great business opportunity if you love cars and possess a good work ethic. Now if you want your shop to be successful, then you will require a combination of effort as well as car mechanic training. And of course, the correct equipment which would upgrade your speed as well as make your repair work easy. If you have the right tools, then you can easily meet the demands of today's car body structures. Here are some of the most essential tools which you might need to repair your sun visors:

• Small, flat-head screwdriver
• Socket set
• Screws

If you know which car parts brand suits the best for your Sun Visors, then it would save a lot of your decision-making time. What we believe is that picking a particular brand would always be helpful in reducing the clutter, and at the same time would make it easier for the customers to find what they are actually looking for. That’s why we have listed out some top brands for sun visors below as follows:

If you are like most of us, then you won’t know much about the related components of car sun visors. Fear not! Here is a quick and easy guide to explain the related parts of the sun visors:

• Sun Visor Clip
• Sun Visor Repair Kits
• Sun Visor Bracket

Sun Visors replacement cost can differ wildly depending on application, the brand of the Sun Visors as well as who does the work. All you have to do is to replace your faulty Sun Visors with us online and then you can leave your car to the mechanic and pick it up a few days later. Just be sure that the car mechanic is highly skilled and has a good reputation. Sometimes the additional service level might cost you more than what you have expected. We also recommend you to take pictures of your car before you leave it with them so that you are sure that later on it is returned back to you in an unharmed condition. Generally, a sun visor is priced at $50 to $150. So, if you are looking for something budget friendly then the manual one should be your go to choose.

Don’t know where to start from? All you got to do is follow the instructions given in the right order:

Choose a replacement sun visor

Even before you start this replacement procedure, you should find a replacement for your old one. While choosing, always keep in mind the structure, design and accurate sizes of the sun visor:

Step 1 - choose one according to your estimated budget

You can choose visors according to the money you are willing to spend. If looking for something inexpensive, you can get it from an online store. Be cautious and careful regarding the size and other properties of the sun visor before investing in one.

Step 2 - Choose a type. You can browse through various options before choosing one

There are sun visors that are operated manually. They will need you to pull them up and down using your hands. They can be shifted outwards to block the sun coming in from either the driver's or passenger's side front windows.

A number of them have an extension that you can manually pull out to block more of the sun to the side or in the space that is present between the two visors over the rear-view mirror.

Lastly, they also include a vanity mirror that when you open, it lights up.

Step 3 - Choose a colour according to your own preference when you select a replacement

Purchase sun visor from the automaker to be sure of the visor you need.

Keep in mind the size of sun visor that you need as this depends largely on the make, model, and year of the vehicle. For all this information, look inside the door jamb of the driver's side door along with the vehicle's title and registration.

Remove the sun visor:

Step 1:

You should unlock the sun visor and take the sun visor and pull it down. Then it should be turned to the side so that is against the window.

Step 2:

The main assembly cover should be removed. For that use a flat-head screwdriver to pry the plastic cover off completely of the main assembly.

It is the main assembly area where the sun visor is attached to the ceiling of the vehicle.

Find tabs and be careful in trying not to break them while removing the cover. The number of tabs (if present) solely depends on the make/model of the vehicle.

Then the plastic cover should be removed carefully by inserting a flathead screwdriver into the slit running down from the top portion of the plastic cover surface. Next, the cover should twist carefully until it comes loose by moving the sun visor around if important. At the end, you should be able to see the screws of the main assembly.

Step 3:

The screws should be removed from the main assembly. According to the type of screws, you should utilize a flathead or Phillips head screwdriver for removing all of the screws that hold the visor in place. Usually, the number ranges from 2-4.

Step 4:

then remove the visor after you have removed all the screws that hold the visor in the right position. Finally, pull the visor out of the main assembly. For this, you might need the visor to be wiggled slightly to clear all tabs (if any) that fasten the visor in position.

Replacing the sun visor:

Now that the old visor has been removed, install the new one. Be careful in installing it with any mirrors or warning labels facing towards the passenger or driver's seat.

Step 1:

The visor stem should be inserted. For that, take a replacement visor and insert the visor stem into the sun visor assembly. Ones that have a tab, should be inserted into the placement hole. Lastly, slide the remaining part of the stem visor into place.

Step 2:

The screws should be inserted. You need to line up the screw holes of the assembly to the visor placement holes. After inserting the screws, tighten them down using a flathead or Phillips head screwdriver varying on the screw type.

Step 3:

The assembly cover should be replaced and place the assembly cover back into the right position. Do it carefully to avoid cracking the cover. Ensure to fit all the tabs right back into their slots. Lastly, now all has been done, probe it to see if it works properly and has a full range of motion.